6
* When the signal is successfully received by the Weather Station, the icon will be switched on. (If not
successful, the icon will not be shown in LCD) So the user can easily see whether the last reception
was successful (icon on) or not (icon off). On the other hand, the short blinking of the icon shows that
a reception is being done now.
FUNCTION KEYS
The simple design of this product features 2 keys.
SET/CH:
• Press and hold for 5 seconds to enter set-up mode.
• Press and release to toggle between channels.
MIN/MAX/+:
• Press and release to toggle between minimum, maximum, and current temperature values.
• Press and hold 5 seconds to reset all minimum and maximum recorded values.
• Press and release to advance hours and minutes.
• Press and release to toggle between 12 hour time and 24 hour time.
OPERATIONS
12 OR 24 HOUR TIME SETTING
1. Press and hold the SET/CH button for 5 seconds.
2. “12h” will flash in the Time section of the LCD.
3. Press and release the MIN/MAX/+ button to toggle between 12 hour time and 24 hour time.
4. Press and release the SET/CH button to confirm selection and advance to the time setting.
Note: Selecting 12 hour time will automatically select Fahrenheit (°F) temperature. Selecting 24
hour time will automatically select Celsius (°C) temperature.
TIME SETTING
1. Press and hold the SET button for 5 seconds.
2. “12h” or “24h” will appear flashing in the TIME section of the LCD.
3. Press and release the SET/CH button once.
4. The hour will begin flashing.
5. Press and release the MIN/MAX/+ button to advance the hours.
6. Press and release the SET/CH button once more, and the minutes will begin to flash.
7. Press and release the MIN/MAX/+ button to advance the minutes.
8. Press and release the SET/CH button to confirm selection.
Note: When in the 12-hour format “PM.” will appear to the left of the hour in the time LCD between
the hours of noon and midnight.
OUTDOOR TEMPERATURE
The temperature received from the remote temperature sensor is viewed in the OUTDOOR LCD.
When there is more than one remote temperature sensor unit in operation, a “boxed” number will
appear to the right of the temperature. This indicates which remote temperature sensor unit (1, 2, or
3) is currently displaying its data in the OUTDOOR LCD. (This feature is explained in further detail in
the section—Adding Remote Temperature Sensors).
VIEWING MINIMUM AND MAXIMUM TEMPERATURE RECORDS
The WS-9029U keeps a record of the MINIMUM and MAXIMUM indoor and outdoor temperatures.
