Bedienungsanleitung La Crosse WS6827 (Seite 1 von 4) (Englisch)

680733

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

The Wireless Color Forecast Station features manual set time, date,

weather forecast, indoor and outdoor temperature/humidity, with

temperature alerts, and heat index and dew point, on a stylish, colorful,

and easy to read display. Use the integrated USB charging port to

charge your smartphone, camera or other device when the forecast

station operates on A/C power. Wireless transmission range of over 90

meters (300 feet) in open air, from transmitter to forecast station.

WIRELESS COLOR FORECAST STATION

THIS STATION LEARNS

Please allow 3-4 days for barometer calibration to generate an

accurate forecast.

SETUP INSTRUCTIONS STEP BY STEP

STEP 1:

 Insert the 5-volt A/C power adapter

into the designated area on the

back of the forecast station.

 Plug the A/C power adapter into a

wall outlet for continuous backlight

(ON/OFF), and dimmer feature.

STEP 2: (optional battery operation)

 Remove battery cover from the forecast station: slide tab down and

pull out to remove the cover.

 Insert 3 NEW AAA batteries (not included) into the back of the

forecast station. Observe the correct polarity (see marking inside the

battery compartment).

 The forecast station will light up and show, indoor temperature,

humidity and time.

 (Press and release the HAUT/BAS/OFF button to illuminate the

backlight for 8 seconds when using only battery power.)

STEP 3:

 Ensure that the transmitter is within 3 meters (10 feet) of the forecast

station.

 Remove battery cover from transmitter: Slide the battery cover down

and lift off the front.

 Insert 2 NEW AA batteries (not included) into the

transmitter. Observe the correct polarity.

 Within 3 minutes, the forecast station will show

readings in the Outdoor temperature area on the LCD.

Note: Use Alkaline batteries (or Lithium for temperatures

below -28.8°C/- 20°F ).

TRANSMITTER SIGNAL STRENGTH

 After the batteries are inserted, the forecast station will search for the

outdoor temperature/humidity transmitter for 3 minutes.

 The antenna symbol will flash during reception, and temperature

display will be dashes “---“.

 The antenna symbol will scroll during transmitter synchronization.

 If synchronization fails once, the antenna will lose one bar.

 If synchronization fails twice, the antenna will lose two bars.

 If reception continuously fails to receive 5 times, the antenna symbol

will be shown as .

 The antenna will show full display with successful RF

(radio frequency) reception.

TROUBLESHOOTING

 If the outdoor temperature is not displayed after three minutes, hold

the RECHERCHE CAPTEUR button on the forecast station for three

seconds to search for outdoor transmitter.

 Next, remove the battery cover from the transmitter then press the TX

button to send a signal.

 If it still does not receive the outdoor temperature, remove the A/C

cord and batteries from both the forecast station and the transmitter

for 15 minutes repeat setup instructions from step 1.

TIME/DATE

The REGLAGES button moves through the program menu and confirm

settings.

Use the button to increase a value.

Use the button to decrease a value.

SET TIME/DATE

Hold the REGLAGES button for three seconds to enter time set mode.

 BEEP ON/OFF: BP ON (BEEP) will flash .The default is ON .Press

and release the arrow button to ON or OFF the BEEP button sound.

 LANGUAGE: The language will flash. The default is FR. Use the

arrow buttons to select the language for weekday display (French,

Italian, Dutch, Spanish, Danish, English or German) and press the

REGLAGES button to confirm and move to 12/24 hour.

 12/24-HOUR: The time format will flash. Use the ARROW buttons to

choose 12-hour or 24-hour time format and press the REGLAGES

button to confirm and move to hour.

 HOUR: The Hour will flash. Use the ARROW buttons to choose the

hour, and press the REGLAGES button to confirm and move to

minutes.

 MINUTES: The Minutes will flash. Use the ARROW buttons to

choose the minutes, and press the REGLAGES button to confirm and

move to the year.

 YEAR: The Year will flash. Use the ARROW buttons to choose the

year, and press the REGLAGES button to confirm and move to the

month.

Wireless Color Forecast Station

WS6827 | Quick Setup Guide

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

La Crosse WS6827 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info