SETTING UP:
When one transmitter is used:
1. First, insert the batteries into the transmitter (see “How to install and replace batteries in the
Temperature transmitter” below).
2. Within 30 seconds of powering up the transmitter, insert the batteries to the Temperature Station
(see “How to install and replace batteries in the Temperature Station” below). Once the
batteries are in place, all segments of the LCD will light up briefly. Then the indoor temperature and
the time as 0:00 will be displayed. If they are not shown on LCD after 60 seconds, remove the
batteries and wait for at least 60 seconds before reinserting them. Once the indoor data is
displayed, user may proceed to the next step.
3. After the batteries are inserted, the Temperature Station will start receiving data signal from the
transmitter.
4. The outdoor temperature should be displayed on the Temperature Station. Also, the signal
reception icon will be displayed. If this does not happen after 1 minute, the batteries will need to be
removed from both units and reset from step 1.
5. In order to ensure sufficient 868 MHz transmission, the final position between the Temperature
Station and the transmitter should not be more than 100 meters (see notes on “Positioning” and
“868 MHz Reception”).
