Bedienungsanleitung La Nordica Babyfiamma (Seite 16 von 56) (Englisch)

643400

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ASSEMBLY AND INSTALLATION INSTRUCTIONS

Chapter 4

CHIMNEY CAPS, DISTANCES AND POSITIONING

Roof

inclination

Distance between

the ridge and the

chimney

Minimum chimney height

(measured from outlet)

β A (m) H (m)

15°

< 1,85 0,50 m over the ridge

> 1,85 1,00 m from roof

30°

< 1,50 0,50 m over the ridge

> 1,50 1,30 m from roof

45°

< 1,30 0,50 m over the ridge

> 1,30 2,00 m from roof

60°

< 1,20 0,50 m over the ridge

> 1,20 2,60 m from roof

CONNECTION TO EXTERNAL AIR INLETS

The appliance must be able to use the necessary air to guarantee regular functioning through external air

inlet. The air inlets must comply with the following requisites:

have a total free section of at least 80 cm.1.

must be protected by grates, metal net or suitable protections as long as they do not reduce the 2.

minimum section stated in point 1 and positioned in order to avoid them being obstructed.

If the combustion agent air is withdrawn directly from outside through a pipe, a downward bend must

be mounted outside or a protection against the wind and no grids or similar must be positioned. (it is

recommended that the air vent always communicates directly with the installation room even if the air is

withdrawn from outside through a pipe). The air  ow can also be obtained from an adjacent room to the

installation one, as long as the  ow can happen freely through permanent openings communicating with

the outside.

The adjacent room, respect to the installation one, must not be put in depression respect to the external

environment by means of reverse draught caused by the presence of another used appliance or intake

device in such room. The permanent openings in the adjacent room must comply with the above-described

requisites. The adjacent room cannot be set up as garage, storage for fuelling material or activity with

danger of  re.

INSULATION, FINISHINGS, COVERING AND SAFETY RECOMMENDATIONS

The coverings, independently from the materials with which they are made, must constitute a self-

supporting construction respect to the heating block and not be in contact with it.

The wooden or fuelling materials beam and  nishings must be positioned outside the hearth radiation

area or adequately insulated.

In case coverings in fuelling material or sensible to heat exist in the space above the generator, an insulating

and non fuelling protection diaphragm must be inserted.

Elements in fuelling or in ammable material like wooden furniture, curtains, etc., directly exposed to the

hearth radiation, must be positioned at a safe distance. The appliance installation must guarantee easy

access for cleaning the same appliance, discharge gas pipe and  ue.

NATIONAL, REGIONAL, PROVINCIAL AND TOWN COUNCIL REGULATIONS

It is necessary to bear in mind all laws and national, regional, provincial and town council Standards present

in the country the appliance has been installed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

La Nordica Babyfiamma Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von La Nordica Babyfiamma

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info