Bedienungsanleitung La Nordica Inserto 70H49 (Seite 23 von 92) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

696294

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

ENGLISH

on the other side. In any case, it has to be considered that the internal or lower surfaces of this beam in ammable material must not come in

contact with temperatures higher than 65 °C. Picture 2 gives some examples of execution.

WARNING: We cannot be made liable for a wrong operation of the plant, when it does not comply with the provisions of

these instructions or when it uses additional products not suitable for this device.

TECHNICAL DESCRIPTION

The appliance is made up of a series of cast-iron elements joined to one another by a xed joint, while the seal is assured by refractory putty.

The assembly is supported by tie rods and nuts located outside the heating body and coated with a carter made of varnished and galvanized

sheet heat-resistant.

The appliances are equipped with an integrated air circuit for the recovery of the heat made up of deectors (radiant ns) on all external

surfaces of the heating body. The appliances are equipped with a hearth with double thickness part.

The appliance works as an intermittent operating appliance.

The insert is equipped with a sight door with ceramic glass (resistant up to 700°C). This allows a charming sight on burning ames. Moreover,

in this way, any possible leak of sparks and smoke is avoided. Under the hearth grating there is a easily extractable ash drawer.

ACCESSORIES

POKER GLOVE Ventilation KIT 1318000

SERIES SERIES * OPTIONAL

* see instructions manual CONNECTION AND MAINTENANCE OF VENTILATION OPTIONAL

The heating of the room occurs:

by convection: the passage of air through the coating and the covering hood releases heat in the room.

a) by convection: the passage of air through the coating and the covering hood releases heat in the room.

b) by radiation: through the sight glass and the steel body, heat is radiated into the room.

The device is equipped with registers of primary and secondary air, with which it is possible to adjust the combustion air.

1A - PRIMARY air register (Picture 8)

With the air register located under the door of the hearth (on the left), it is possible to adjust the air ow through the ash drawer and the

grating in direction of the fuel. The primary air is necessary for the combustion process during the ignition. When the knob is completely

on the left, the register is closed, when the knob is completely on the right the register is opened.

The ash drawer has to be emptied regularly, so that ash cannot hinder the intake of primary air for the combustion. Primary air is also

necessary to keep re live.

During the combustion of wood, the primary air register must be opened only a few, since otherwise the wood burns quickly and the

device can overheat (see chapter NORMAL OPERATION).

2A - SECONDARY air register (Picture 8)

On the door of the hearth to the right, there is a secondary air register.

This valve must be opened (and therefore shifted to the right), in detail, for the combustion of wood, so that unburnt carbon can be

subject to a post-combustion, increasing the yield and assuring the cleaning of the glass (see chapter NORMAL OPERATION).

3 - Smoke valve register

Combustion is not always regular; as matter of fact both atmospheric conditions and outside temperature can inuence it by modifying the

depression in the stack. For this reason, all inserts are equipped with an adjustable smoke valve with automatic opening allowing an optimal

adjustment of the draught.

Through the lever located on the bottom left, it is possible to position the smoke valve correctly (all to the left = all open). Should the door

open independently from its position, the smoke valve opens automatically.

The adjustment of the registers necessary to reach the rated caloric yield is the following one:

Hourly consumption ( kg/h ) PRIMARY AIR SECONDARY AIR TERTIARY AIR Smoke valve register

INSERTO 60

CLOSED OPENED NO CLOSED

INSERTO 70

CLOSED OPENED NO CLOSED

INSERTO 70 H49

CLOSED OPENED NO CLOSED

FLUE

Essential requirements for a correct operation of the device:

• the internal section must be preferably circular;

• be thermally insulated and water-proof and produced with materials suitable to resist to heat, combustion products and

possible condensates;

• not be throttled and show a vertical arrangement with deviations not greater than 45°;

• if already used, it must be clean;

• all the sections of the ue gas duct must be accessible to inspection;

• inspection openings must be provided for cleaning.

• observe the technical data of the instructions manual;

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

La Nordica Inserto 70H49 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info