Bedienungsanleitung La Nordica Jennifer (Seite 28 von 80) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

696189

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ENGLISH

GLASS CLEANING

Thanks to a specic inlet of secondary air, the accumulation of dirty sediments on the glass-door is reduced with ecacy. Nevertheless this can

never be avoided by using solid fuels ( particularly wet wood ) and it has not to be understood as a defect of the appliance.

IMPORTANT: The cleaning of the sight glass must be carried out only and exclusively with cold device to avoid the explosion

of the same. For the cleaning, it is possible to use specic products or a wet newspaper paper ball passed in the ash to rub it. Do

not use cloths, abrasive or chemically aggressive products by cleaning the hearth glass.

The correct lighting phase, the use of proper quantities and types of fuels, the correct position of the secondary air regulator, enough draught

of the chimney-ue and the presence of combustion air are the essential elements for the optimal functioning of the appliance and for the

cleaning of the glass.

BREAK OF GLASSES: Given that the glass-ceramic glasses resist up to a heat shock of 750°C, they are not subject to thermal

shocks. Their break can be caused only by mechanic shocks (bumps or violent closure of the door, etc.). Therefore, their

replacement is not included in the warranty.

CLEANING OUT THE ASHES

All the devices are equipped with a hearth grating and an ash drawer for the collection of the ashes Picture 8.

It is suggested to empty periodically the ash drawer and to avoid it lls completely in order not to overheat the grating. Moreover, it is

suggested to leave always 3-4 cm of ash in the hearth.

CAUTION: The ashes removed from the hearth have to be stored in a container made of re-resistant material equipped

with an air-tight cover. The container has to be placed on a re-resistant oor, far from ammable materials up to the

switching o and complete cooling.

CLEANING THE FLUE

The correct lighting phase, the use of proper quantities and types of fuels, the correct position of the secondary air regulator, enough draught

of the chimney-ue and the presence of combustion air are the essential elements for the optimal functioning of the appliance.

The device should be completely cleaned at least once a year or every time it is needed (in case of bad working and low yield). An excessive

deposit of soot can cause problems in the discharge of smokes and re in the ue.

The cleaning must be carried out exclusively with cold equipment. This operation should be carried out by a chimney sweeper

who can simultaneously perform an audit of the ue (checking of possible deposits).

During the cleaning, it is necessary to remove the ash drawer, the grating, and the smoke deectors from the device in order to ease the fall of

the soot. The deectors can be easily extracted from their seats since they are not fastened using screws. Once the clearing has been carried

out, place them back in their seats (Picture 9).

CAUTION: The lack of the deectors causes a strong depression, with a too fast combustion, an excessive consumption of

wood with related overheating of the device.

MAJOLICAS IF PRESENT

La NORDICA S.p.A.has chosen majolica tiles, which are the result of high-quality artisan work. As they are completely carried out by hand,

the majolica may present crackles, speckles, and shadings. These characteristics certify their precious origin.

Enamel and majolica, due to their dierent coecient of dilatation, produce microcrackles, which show their authentic feature.



For the cleaning of the majolica we suggest you to use a soft and dry cloth; if you use a detergent or liquid, the latter might soak

in and highlight the crackles permanently.

PRODUCTS MADE OF NATURAL STONE IF PRESENT

Natural stone has to be cleaned with very thin abrasive paper or with an abrasive sponge. Do NOT use any cleanser or uid.

VARNISHED PRODUCTS IF PRESENT

After some years of product use a change in the varnished details colour is totally normal. This is due to the considerable temperature range

the product is subject to whenever in use and to the varnish ageing of time passing by.



ATTENTION: before any possible application of the new varnish, do clean and remove all the traces from the surface which has to

be varnished.

ENAMELLED PRODUCTS IF PRESENT

For the cleaning of enamelled surfaces use soap water or not aggressive and not chemically abrasive detergents.



After the cleaning do NOT let soapy water or any cleanser dry but remove them immediately.

DO NOT use sandpaper or steel wool.

CHROMIUMCOMPONENTS IF PRESENT

If the components become bluish due to overheating, this can be solved with a suitable product for cleaning. DO NOT use abrasives or

solvents.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

La Nordica Jennifer Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info