Bedienungsanleitung La Nordica Nicoletta Forno (Seite 21 von 60) (Deutsch, Englisch, Französisch, Italienisch)

811800

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Rossella Plus – Rossella Plus forno / Nicoletta – Nicoletta forno / Gisella

7192450 – EN

The appliances with constructive system 2 must be connected to their own flue. The operating with open

door is NOT allowed.

The chimney stove is equipped with an upper smokes exhaust. The connection pipe to the flue must be the

shortest possible, right, tight and according to the current regulations.

The connection to the chimney must be performed with stable and strong pipes (we recommend a

thickness of 2 mm). The pipe for smokes exhaust must be fixed hermetically to the chimney. The diameter

inside the connection pipe must correspond to the external diameter of the smokes exhaust small trunk of

the stove. This is ensured by pipes according to DIN 1298.

ATTENTION: Eventual flammable pieces in the area of 20 cm round the connection pipes must be

changed with fireproof and not sensitive to heat materials.

For a good operation of the equipment it is essential that in the installation place it is introduced sufficient

air for combustion (see chapt. 7).

The depression on the chimney should be 10-12 Pa (=1.0-1.2 mm of water column). The measurement

must be done always with the equipment hot (rating calorific value). When the depression exceeds 17 PA

(1.7 mm of water column) it is necessary to reduce the same with the installation of an additional flue

adjuster (butterfly valve) on the exhaust pipe or in the chimney.

For safety reasons the door must be opened only for the loading of the fuel, while during the operation and

the rest, the door of the hearth must remain closed.

7. AIR ENTRANCE INTO THE INSTALLATION PLACE DURING COMBUSTION

As the wood chimney stoves take their combustion air from the installation place, it is essential that a

sufficient quantity of air is introduced in the installation room itself.

In case of tight doors and windows (for example houses built according to the energy saving criteria) it is

possible that the air entrance is not guaranteed, compromising the draught, the welfare and the security of

the people. It is necessary to guarantee a further air entrance through an external air intake, to be

positioned in the nearby of the appliance or through air connection towards outside or a near ventilated

room, with the exception of thermal units place or garages (forbidden).

The connection pipe must be flat with a minimum diameter of 120 mm, a maximum length of 4 m and with

no more than 3 bends. If there is a direct connection with the outside it must be endowed with a special

windbreak.

The air entrance for combustion into the installation place must not be closed during the operation of the

cooker. It is absolutely necessary that in the environment in which the cookers operate with the natural flue

of the chimney, it is introduced as much air as necessary for the combustion, i.e. up to 20 m

/hour.

The natural recirculation of air must be ensured by some fixed openings on the outside. The size of the

necessary openings for air is fixed by the relevant prescriptions. Ask

information to your chimney sweeper. The openings should be

protected with grids and should never be obstructed.

An extraction hood (aspirating) installed in the same room or in a

room nearby, causes depression with output of combusted gasses

(smoke, smell. It is also necessary to assure a further fresh air flow.

The depression in an extraction hood can at worst hypothesis,

transforms the flue into an external air intake, by sucking the

smokes of the rooms with dangerous consequences for the

people.

OPTIONAL: For a better comfort and corresponding oxygenation of

environment, the stove combustion air can be directly

withdrawn at the outside. In order to do that, the stove can be

connected to the external air socket by an optional junction

(

Picture 8

C) ( Kit d. 120 )

8. ADMITTED/NOT ADMITTED FUEL

The fuel admitted is made of wood logs. One must use only logs of dry wood (water content max. 20 %).

The wood pieces should have a length of 30 cm. and a maximum circumference of 30 cm’s.

The wood used as fuel must have a moisture contents lower than 20%, which is obtained after at least 1

year drying (tender wood) or 2 years (hard wood) and must be stored in a dry and ventilated place (for ex.

Under a shed). The wet wood makes ignition more difficult because it is necessary a greater quantity of

energy to evaporate the existing water. The humid contents has the disadvantage that, with the

temperature lowering, the water condensates first in the hearth and then in the chimney. The unseasoned

wood contains about 60 % of H20, then it is not suitable to be burnt.

Picture 8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

La Nordica Nicoletta Forno Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info