Bedienungsanleitung La Spaziale RAPID (Seite 14 von 36) (Englisch)

812600

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

MANUAL FOR USE AND MAINTENANCE

14 LSC 001 -UK- REV. 06

2.3 ROUTINE APPLIANCE MAINTENANCE TO BE PERFORMED BY THE USER

NOTE. To grant the efciency of the appliance and to maintain correct operation, it is necessary

to follow the manufacturer’s instructions as to cleaning and regular maintenance.

WARNING!

Cleaning and routine maintenance operations must be carried out by the user according to the

manufacturer’s instructions given here below. Before carrying out any kind of cleaning operation,

disconnect the appliance from the electricity mains and from the gas system (if tted). Cleaning

and routine maintenance operations must be carried out when the machine is cold and using

protective gloves to prevent abrasions.

DAILY AT THE END OF THE JOB

1a) Replacing the water in the boiler (Range New - Rapid - Spazio).

After turning off the appliance, replace the water in the boiler as follows:

• Place a container that can withstand high temperatures below the hot water nozzle (7) to prevent any

hot water spills.

• Turn the hot water knob (6) anticlockwise until the boiler is completely empty, checking the level gauge

(2). Rell the boiler immediately using the manual lling button (1).

1b) Replacing the water in the boiler (Range S3 - EK – EP models).

• Place a container that can withstand high temperatures under the hot water nozzle (7) to prevent any

hot water spills.

• Press and hold down the hot water knob (6) for at least 5 seconds: the automatic boiler emptying cycle

will begin (all machine controls are deactivated during this phase). On the EK model, the LEDs 18-21

are ashing during this phase while the LEDs 19-20 remain lit.

• At the end of the cycle, the appliance restores the correct water level in the boiler through the automatic

rell system. To interrupt this cycle, it is sufcient to hold down the hot water button (6) for about 2

seconds.

• Disconnect the appliance.

1c) Replacing the water in the boiler (Range S5 - Compact).

After turning off the appliance, replace the water in the boiler as follows:

• Place a container that can withstand high temperatures under the hot water nozzle (7) to prevent any

hot water spills.

• Open the hot water valve (6), moving the lever upwards until the boiler is completely empty, checking

the level indicator (2). Rell the boiler immediately using the manual lling button (1).

1d) Replacing the water in the boiler on appliances with timed water delivery (optional) (Range S5).

• Place a container that can withstand high temperatures under the hot water nozzle (7) to prevent any

hot water spills.

• Press and hold down timed hot water delivery button (42) for at least 5 seconds: the automatic boiler

emptying cycle will begin (all machine controls are deactivated during this phase).

•

At the end of the cycle, the appliance will restore the correct water level in the boiler using the automatic

ller. To interrupt this cycle, press the hot water delivery button (42).

• Disconnect the appliance.



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

La Spaziale RAPID Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info