INSTRUCTIONS OF USE 17
3.
Fitting the circular part on the flue
socket
A circular part is supplied inside the
appliance. This part must be fitted in
position inside the flue in order to achieve
all the values in the UNE-EN 12815, UNE-
EN 13229, UNE-EN 13240 standard.
Because this part causes a lot of the gases
produced by combustion to be retained, it
requires optimum flue and fuel conditions.
Users may, therefore, prefer not to fit it if
such conditions cannot be ensured.
Figure No.18 - Movements to fit the
circular deflector on the flue socket
Ocean / Atlantic 610R
The 610R model also incorporates two
stainless steel pieces in the hearth. These
pieces must be positioned as indicated in
the image if all the values contained within
the UNE-EN 12815, UNE-EN 13229 and
UNE-EN 13240 regulations are to be
fulfilled.
Figure No.19 - Stainless-steel pieces 610R
Given that these pieces generate a
significant additional retention of fumes
resulting from the combustion, their
placement must comply with some
optimum draft and fuel conditions. For this
reason, the user may choose not to fit
them if these conditions are not fulfilled.
