Bedienungsanleitung Lamax C3 (Seite 4 von 100) (Deutsch, Englisch, Polnisch)

698933

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

- 3 -

d) Camera automatically turns o after disconnecting the power supply.

4) Changing modes and menu navigation

a) Repeatedly tap the “MODE” button to toggle between video/camera/gallery.

b) Camera menu has 3 sections – basic camera settings/video conguration/photo settings. To

toggle between these use the “MENU” button, which also serves to access the menu. Under each

section move vertically using the “UP” and “DOWN” arrows and select by pressing “OK”.

c) To independently change the settings in video/photo mode, you must access the settings from

the relevant mode. Therefore, you can only enter video settings in video mode and photo se-

ttings in photo mode.

d) To go back a level use the “MENU” button. To completely exit the setting, press the “MODE”

button.

5) Recording / taking photos / gallery

a) To start the camera recording press the “OK” button. Press it again to stop recording. The camera

must be in record mode.

b) Automatic recording – the automatic recording function is always enabled. Automatic recor-

ding starts after connecting the camera to a power supply. If the car's power only starts after

the ignition is turned on then the camera turns on and starts recording when the car is started.

c) Automatically start/stop recording – the camera automatically stops recording and turns o

after the engine is turned o and the power cut. In some cars the cigarette lighter is powered

permanently. In this case, be sure to unplug the cable from the cigarette lighter.

d) Take photos by pressing the “OK” button. The camera must be in photo mode.

e) After switching to the gallery, which displays a list of recorded videos and photos, navigate

between these using the “UP” and “DOWN” arrows. To start and stop a recording press the “OK”

button.

6) Deleting the entries on the camera

a) Deleting material directly on the camera – can be done in the gallery. After pressing the “MENU”

button, select “Delete” and then “Current image”.

b) Deleting all entries – can be done in the gallery. After pressing the “MENU” button, select “Dele-

te” and then “Delete all”.

7) Protecting the les on the camera.

a) Locking the current entry – can be done in the gallery. After pressing the “MENU” button, select

“Lock” and then “Lock the current image”.

b) Locking all entries – can be done in the gallery. After pressing the “MENU” button, select “Lock”

and then “Lock all images”.

c) Unlocking the current entry – can be done in the gallery. After pressing the “MENU” button,

select “Lock” and then “Unlock current image”.

d) Unlocking all entries – can be done in the gallery. After pressing the “MENU” button, select “Lock”

and then “Unlock all images”.

8) Connecting to a PC

Camera can be connected to a PC via the supplied mini USB cable and use it as USB storage.

HR SL LT BG HU PL SK CZ DE EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lamax C3 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info