Bedienungsanleitung Lanaform LA090206 (Seite 12 von 74) (Deutsch, Englisch, Holländisch, Französisch)

719436

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

EN FR NL DE SL SV

12 / 74 AB PM-10 0 EN Instruction manual

Guidance and manufacturer’s declaration - electromagnetic immunity

ABPM-100 is intended for use in the electromagnetic environment specied below.

The customer or the user of ABPM-100 should assure that it is used in such an environment.

Immunity test IEC 60601test level Compliance level Electromagnetic environment - guidance

Radiated RF

IEC 61000- 4-3

3 V/m 80 MHz

to 2.5 GHz

3 V/m Portable and mobile RF communications equipment should

be used no closer to any part of ABPM-100, including cables,

than the recommended separation distance calculated from

the equation applicable to the frequency of the transmitter.

Recommended separation distance

d = 2.3√P 800 MHz to 2,5 GHz

Where P is the maximum output power rating of the transmitter

in wat ts (W) according to the transmitter manufac turer and

d is the recommended separation distance in meters (m).

Field strengths from xed RF transmitters, as determined

by an electromagnetic site survey

should be less than

the compliance level in each frequency range.

Interference may occur in the vicinity of equipment

marked with the following symbol:

NOTE 1: At 80 MHz and 800 MHz, the higher frequenc y range applies.

NOTE 2: These guidelines may not apply in all situations.

Electromagnetic propagation is aected by absorption and reection from structures, objects and people.

a: Field strengths from xed transmitters, such as base stations for radio (cellular/cordless) telephones and land

mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically

with accurac y. To assess the electromagnetic environment due to xed RF transmitters, an electromagnetic site

survey should be considered. If the measured eld strength in the location in which ABPM-100 is used exceeds

the applicable RF compliance level above, ABPM-100 should be observed to verify normal operation. If abnormal

performance is observed, additional measures may be necessary, such as re-orienting or relocating ABPM-100.

b: Over the frequency range 150 kHz to 80 MHz, eld strengths should be less than 3 V/m.

Recommended separation distances between portable and mobile RF communications equipment and ABPM-100

ABPM-100 is intended for use in an electromagnetic environment in which radiated RF disturbances are con-

trolled. The customer or the user of ABPM-100 can help prevent electromagnetic interference by maintaining a

minimum distance between portable and mobile RF communications equipment (transmitters) and ABPM-100

as recommended below, according to the maximum output power of the communications equipment.

Rated maximum output

power of transmitter

Separation distance according to frequency of transmitter

150 kHz to 80 MHz

d = 1.2√P

80 MHz to 800 MHz

d = 1.2√P

800 MHz to 2,5 GHz

d = 2.3√P

0,01 0.12 0.12 0.23

0,1 0.38 0.38 0.73

1 1.2 1.2 2.3

10 3.8 3.8 7.3

100 12 12 23

For transmitters rated at a maximum output power not listed above, the recommended separation distance d in

meters (m) can be determined using the equation applicable to the frequency of the transmitter, where P is the

maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.

NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.

NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is af-

fected by absorption and reection from structures, objects and people.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lanaform LA090206 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info