Bedienungsanleitung Lanaform LA120116 (Seite 6 von 88) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

719213

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

INSTRUCTIONS FOR USE

Features:

• 1.8l capacity

• Continuous operation for more than 8 hours

• Easy-fill water tank

• Integrated safety mechanism which automatically stops the diffuser from working when the water tank is empty or

depending on the chosen diffusion period

• High-quality transducer guarantees correct and long-lasting operation

Functions:

• Increases and regulates the relative humidity of the room

• Eliminates electrostatic charges

• Improves air quality

Directions for use:

• Position the appliance in the room half an hour prior to switching it on so that it is the same temperature as the room.

• Remove the water tank from the appliance (Fig. 2) and unscrew the cap by turning it anticlockwise (Fig. 3).

• Fill the tank with distilled or demineralised water at a maximum temperature of 40°C (Fig. 4).

• The humidifier is equipped with a water filter. This especially helps deal with the calcium content of the water. To attach

this, attach the water filter to the inside of the tank cap.

• Check that the silicone washer is correctly in place and then close the cover by turning it clockwise.

• Make sure that it is clean and watertight then carefully position the tank in the base unit (Fig. 5).

• With dry hands, plug in and switch on the appliance. The yellow warning light which indicates that water is present

lights up. The appliance starts working on the low vapour intensity (warning light on) (Fig. 6).

• You can then adjust to the desired vapour intensity by turning the vapour output adjustment button (Fig. 7).

• You can also select the diffusion period (2 hours, 4 hours, 6 hours or 8 hours). To do this, press the diffusion period

adjustment button (Fig. 8).

•

Once the tank is empty or the diffusion time has come to an end, the safety mechanism located inside the appliance will

automatically stop the electricity supply if the circuit is overheating The “water presence” warning light turns red (Fig. 9).

• Strict monitoring is required at all times to prevent any risk.

CAUTION: DESPITE THE SAFETY MACHANISM WHICH STOPS THE TRANSDUCER FROM WORKING,

WHENEVER POSSIBLE SWITCH OFF THE APPLIANCE WHEN NOT IN USE.

MAINTENANCE AND STORAGE:

If the water is hard, i.e. it contains a lot of calcium and magnesium, this can deposit a “white powder” inside the

appliance and cause a thick build-up on the surface of the basin, transducer (ceramic disc which produces the

ultrasounds) and interior walls of the water tank. Build-up on the surface of the transducer prevents the appliance from

working correctly.

We recommend:

1) always using water which has been boiled and then cooled or distilled water,

2) cleaning the tank every 3 days, cleaning the transducer every week,

3) changing the water in the tank regularly so that it is fresh, not leaving it in the appliance for more than 2 days,

4) cleaning the whole appliance and making sure that all its components are completely dry when not in use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lanaform LA120116 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info