Bedienungsanleitung Lanaform LA120119 (Seite 7 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

719429

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

New Vapolux EN Instruction manual 7 / 64

EN FR NL DE ES IT PL CS SK HU SL HR RU BG SV AR

the device will be in manual mode, i.e. it will

continue to emit the mist until you stop it or

while there is water in the reservoir. Conversely,

if you press this button, the device will go into

AUTO mode and will only stop when it has reached

the programmed level of relative humidity. To exit

from this AUTO mode, you must go through the

maximum programmable level of 90%.

• “Timer” for adjusting the length of vapour emis-

sion (item 5, Figure 2). To exit this mode, you will

need to go through the maximum programmable

period of 12 hours.

Important notes

• Only use clean, fresh, distilled or demineralised

water to avoid any malfunction.

•

Do not pour water into the diuser sprinkler tip to

prevent malfunction and re risk (Item 1, Figure 1).

•

Make sure the reservoir lid is tightly closed after lling

so as to avoid leakage or potential electric shocks.

• The reservoir must be kept clean. If the sprinkler

tip emitting cold mist is dirty, clean it with a

brush or damp cloth.

Even though there is a safety device that stops

the transducer working, do not leave the

device connected when you are not using it.

MAINTENANCE AND STORAGE

If the water contains too much calcium and too much

magnesium, it may deposit a “white powder” in the

device. If this foam is deposited on the transducer

(white ceramic ring emitting ultrasounds (item i,

Figure 3)), this will prevent the New Vapolux humid-

ier from working properly.

Care

We recommend:

1 Using clean, fresh, distilled or demin-

eralised water each time it is used.

2 Cleaning the reservoir every 2 days and

cleaning the transducer every week.

3 Cleaning the device (see explanations

below) and making sure that all its parts

are completely dry when it is not in use.

To clean the transducer (white

ceramic ring (item i, Figure 3))

1 Put 2 to 5 drops of vinegar on its surface

and leave them there for 2 to 5 minutes.

2 Brush the foam o the surface with

a soft brush. Do not use a hard

tool to scrape the surface.

3 Rinse the reservoir of the base in clean water.

4 Do not use soap, solvent or spray

cleaner to clean the transducer.

To clean the water basin

1 Clean the basin with water using a soft

cloth and vinegar if there is foam or

limescale deposits on the inside.

2 Rinse the basin in clean water.

To clean the cool mist emission

nozzle of the device

1 Clean this with a brush or damp cloth.

2 Rinse the nozzle in clean water.

Storage

Having cleaned and dried the device, store it in a dry,

cool place out of the reach of children.

TROUBLESHOOTING

In the event of a malfunction, under normal con-

ditions of use, please refer to the following chart:

Eects Possible causes Solutions

No steam, no

light showing

If there is no light Check that the device

is connected and

no breakdown has

occurred in that area

The water level in the

reservoir is too low

Add water to

the reservoir

Water is leaking

from the reservoir

Check that the

reservoir is in the

right position

The temperature of

the unit is too low

Place the unit in a

room at ambient

temperature for half

an hour prior to use

Mist has an

unusual smell

The water has been

standing in the

reservoir too long

Clean the reservoir,

then pour into it clean,

fresh, distilled or

demineralised water

Low intensity Too much/too little

water in the reservoir

Empty the water

out of the reservoir

or add water to it

Sediment on the

transducer

Clean the transducer

The water is too cold Use water that is at

room temperature

The water is not clean Clean the reservoir,

then pour into it clean,

fresh, distilled or

demineralised water

New Vapolux - LA120119 - 003 - 2017 - Notice - K.indd 7 02/06/2017 14:27:18

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lanaform LA120119 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info