Bedienungsanleitung Lanaform LA120125 (Seite 6 von 44) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

719427

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

English 6 / 44

EN FR NL DE ES IT PL CS SK SL HR BG

MAINTENANCE

AND STORAGE

If the water contains too much calcium and

magnesium, it may deposit a “white powder”

in the device. If this foam is deposited on the

transducer (Fig. , point ), this means that

the device will not work properly.



do not use products

containing bleach to clean the

device. Use only washing-

up liquid or vinegar!



do not touch the heating

resistor (Fig.1, point 11)

before it has cooled down!

In the event of accidental

burns, consult a doctor!

Maintenance

We recommend:

1 Using fresh, distilled or deminer-

alised water each time it is used.

2 Cleaning the reservoir every

2 days and cleaning the

transducer every week.

3 Changing the water in the

reservoir every 2 days.

4 Cleaning the device (see expla-

nations below) and making sure

that all its parts are completely

dry when it is not in use.

To clean the transducer (Fig. , point ):

1 Put 2 to 5 drops of vinegar

on its surface and leave them

there for 2 to 5 minutes.

2 Brush the foam o the surface with

a soft brush (Fig. 1, point 12): Do not

use a hard tool to scrape the surface.

3 Do not use soap, solvent or spray

cleaner to clean the transducer.

To clean the reservoir (Fig. , point ) and

the lid (Fig. , point ):

1 Remove the ring seal (Fig.

1, point 3) of the lid.

2 Clean the reservoir, the lid and the

ring with water using a soft cloth

and vinegar if there are any foam or

limescale deposits on the inside.

3 Rinse the reservoir in clean water.

To clean the mist emission sprinkler tip

(Fig. , point ):

1 Clean this with a brush or damp cloth.

2 Rinse with clean water.

To clean the base (Fig. , point ):

1 Clean it with a little water and

possibly a little vinegar us-

ing a brush or soft tissue.

2 Do not use soap, solvent or spray

cleaner to clean the base.



do not immerse the base

in water and do not allow

water to enter the air inlet

(Fig. 1, point 9) and the

exhaust vent (Fig. 1, point 6)!

Storage



always switch the device

o, unplug it and empty it

before transporting it.

Having cleaned and dried the device, store

it in a dry, cool place out of the reach of

children.



BREAKDOWNS

AND REMEDIES

In the event of a malfunction under nor-

mal conditions of use, please refer to the

following list:



No mist.



If there is no light.



Check that the device is connected

and that there is no mains fault.



The water level in the

reservoir is too low.



Add water to the reservoir.



Water is leaking from the reservoir.



Check that the reservoir is

in the right position.



The temperature of the unit is too low.



Place the unit in a room at

room temperature for half

an hour prior to use.



Mist has an unusual smell.



The water has been standing

in the reservoir for too long.



Clean the reservoir and pour fresh,

distilled or demineralised water into it.



Low intensity.



Too much/too little water

in the reservoir.



Empty water out of the

reservoir or add water to it.



Sediment on the transducer.



Clean the transducer.



The water is too cold.



Use water that is at room temperature.



The water is not clean.



Clean the reservoir and pour fresh,

distilled or demineralised water into it.

TECHNICAL DATA

Reference: LA

Power supply: -V~, -Hz

Consumption: W (cool mist), W (warm

mist)

Reservoir capacity: .l

Maximum emission rate: ml/hr (cool

mist) and ml/hr (warm mist)

Dimensions: (L)*(W)*(H) mm

ADVICE ON WASTE

DISPOSAL

The packaging consists entirely of envi-

ronmentally-friendly materials that can be

taken to your local waste sorting centre to

be used as secondary materials. Cardboard

can be placed in a paper collection contain-

er. Packing lm must be taken to your local

sorting and recycling centre.

When you are no longer using the device,

dispose of it in an environmentally respon-

sible manner and in compliance with the

statutory requirements.

LIMITED WARRANTY

LANAFORM guarantees that this product

will be free from any material and work-

manship defects for a period of two years

from the date it was purchased, other than

as specied below.

The LANAFORM warranty does not cover

damage caused by normal wear and tear

on this product. In addition, the warranty

on this LANAFORM product does not cover

damage caused as a result of any abusive,

inappropriate or incorrect use, accident,

attachment of any unauthorised accesso-

ry, modication of the product or any oth-

er situation of whatever kind, beyond the

control of LANAFORM.

LANAFORM shall not be held liable for

any type of incidental, consequential or

special damage.

Any implied warranties of the product’s

tness for purpose are limited to a period

of two years from the original purchase

date on presentation of a copy of the proof

of purchase.

Upon receipt, LANAFORM will repair or

replace your device, as appropriate, and

return it to you. The warranty may only be

used at the LANAFORM Service Centre. Any

maintenance and repair work carried out

on this product by any person other than

the LANAFORM Service Centre will invali-

date this warranty.

Lanaform LA120125 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info