Bedienungsanleitung Lanaform LA120420 (Seite 5 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

719541

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

CN-100 P 5 / 60

EN FR NL DE ES IT SL BG

PREPARING THE NEBULISER FOR USE

Clean and disinfect the nebulisation kit, the mask and mouth piece before using it

for the rst time after buying it. Clean and disinfect the nebulisation kit, the mask and

the mouth piece before using it if the device has not been used for a lengthy period or if

several people use the same device.

For cleaning and disinfecting instructions, consult the appropriate chapter of these

instructions for use.

Make sure that the air lter is changed regularly.

Consult the section on “Changing the air lter”.

1. Remove the nebulisation

kit cartridge.

2. Remove the top section of the drug

reservoir’s inhalation system.

a) Turn the top part of the

inhalation system in an

anti-clockwise direction.

b) Lift the top section of the

inhalation system to remove

it from the drug reservoir.

3. Add the appropriate volume

of the prescribed drug to

the drug reservoir.

The capacity of the drug

reservoir is between 2 and 10ml.

The scale markings that appear

on the nebulisation kit are shown for

reference only. Please use the scale

markings on your syringe or bottle

for accurately measuring the drug.

4. Check that the spray cap is

correctly xed to the top part

of the inhalation system.

5. Fix the top section of the inhalation

system to the drug reservoir.

a) Place the top section on the

drug reservoir, as illustrated.

b) Turn the top part of the inhalation

system in a clockwise

direction and align it with the

drug reservoir until they click

into place, as illustrated.

6. Fix the cartridge to the top

section of the inhalation system.

7. Place the batteries (4 AA 1.5V – not

supplied) in the container provided

for this purpose or connect the

USB cable supplied with the

nebulisation kit and an adapter

of 1.0A minimum (not supplied).

External USB Power Supply

DC 5

V 1A

8. Fix the accessory

required to the top section

of the inhalation system.

a) Fix the child’s or adult’s

mask to the top section of

the inhalation system.

b) Fix the mouth piece to the top

section of the inhalation system.

a) b)

9. Fix the air tube.

a) Loosely screw the air tube bracket

and insert it rmly into the air tube

connector on the compressor.

b) Loosely screw the air tube bracket

and insert it rmly into the air tube

connector on the drug reservoir.

ON/OFF

Check that the air tube is

correctly attached to the compressor

and nebulisation kit and that it

does not become loose. When you

insert the air tube plug into the air

tube connectors, screw it loosely

to prevent the air tube becoming

disconnected when in use.

Make sure that you do not

spill the drug when you are

attaching the air tube. Keep

the nebulisation kit upright.

Use the nebulisation kit

bracket as a temporary support

for the nebulisation kit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lanaform LA120420 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info