Bedienungsanleitung Lanaform LA131102 (Seite 3 von 33) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

719381

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

Use on the beard or sideburns

This support (2), designed to cut and smooth out the beard and sideburns, can be designed with the

adjustable guides (1). Choose the support that you would like and place it as shown in Figure C.

Adjustable supports for combs

The NOSE SHAVER comes with two adjustable guides (1) that allow you to choose from the following

lengths:

Short comb: 2 to 8 mm

Long comb: 10 to 16 mm

System for ventilation and hair collection

The NOSE SHAVER is equipped with a ventilation system that is active at all times during operation. The

trimmed hairs are automatically collected in the receptacle (6) Empty and replace the hair receptacle after

each trim.

Check that the ventilation screen (8) is not covered or obstructed during use.

Light

The NOSE SHAVER has a light (7) that allows for enhanced visibility of the areas you want to work on.

CLEANING AND MAINTENANCE

Important

Ensure that the NOSE SHAVER is not on before cleaning the blades.

Do not submerge the NOSE SHAVER in water ( g. A). Only the set of blades and the

heads are washable in water.

To remove the trimmed hair from the NOSE SHAVER, remove the head (5) or (2) by

turning it counterclockwise and remove the hair receptacle (6).

Clean the two parts with the brush provided for this purpose (11) or wash them

with water ( g. B).

Ensure that the head or set of blades are completely dry before

remounting them. To dry them, use a soft rag.

Clean the blades of the beard head with the brush provided for this purpose. It is

also possible to clean the body of the apparatus with a soft rag. Never use abrasive

solvents or detergents.

PARTS

Adjustable guides (2; 4 ; 6; 8 mm and 10; 12; 14; 16 mm)1.

Head for shaving the beard and sideburns 2.

Blade protection support3.

Pivoting blades of the razor4.

Head for shaving the nose and ears5.

Receptacle for hairs6.

Light7.

Ventilation screen8.

Switch9.

Battery cover10.

Cleaning brush11.

Lubricating oil12.

INSERTION/REPLACEMENT OF BATTERIES

Remove the battery cover (10) by turning it counterclockwise. Insert one AA battery (not included) into the

razor, making sure to match the poles. Re-close the battery compartment with the cover (10) by turning

it clockwise.

In order to respect environmental protection policies, we recommend that you do not dispose of a used

battery by throwing it away in a trash can in your home; instead, deposit it at a recycling center.

USAGE

Remove the blade protector.

Turn the switch to the Marche position (I)

Replacement of razor blades

The NOSE SHAVER comes with two shaving heads (2) and (5). To a x one of them, insert it in the groove

and turn it clockwise so that the round part of the shaver head is facing the round part of the receptacle

for hairs (6).

To remove one of the massage heads, turn it counterclockwise.

Use for the nose and ears

Gently insert the metallic part of the support (4) into the nose or ear to trim unwanted hair.

Nose Shaver

EN EN

10.

11. 12.

Notice Nose Shaver Book.indd 4-5 11-10-2010 15:06:13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lanaform LA131102 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info