Bedienungsanleitung Lancom 1640E (Seite 1 von 1) (Englisch)

703316

Zoom out

Zoom in

Vorherige Seite

1/1

Nächste Seite

Hardware

Power supply 12 V DC, external power adapter (110 or 230 V) with bayonet connector to secure against

disconnection

Power consumption Max. ca. 8.5 W

Environment Temperature range 0 – 40 °C; humidity 0 – 95 %; non-condensing

Housing Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; measures

210 x 45 x 140 mm (W x H x D)

Number of fans None; fanless design, no rotating parts, high MTBF

Interfaces

WAN 10 / 100 / 1000 Mbps Gigabit Ethernet

ETH 3 individual 10 / 100 / 1000 Mbps Gigabit Ethernet ports; ex-factory operation as switch. One

port congured as WAN port. The ports can be electrically disabled in the LCOS conguration

and support energy saving functionality as per IEEE 802.3az.

USB USB 2.0 Hi-Speed host port for connecting USB printers (USB print server), serial devices

(COM-port servers), or USB data media (FAT le system)

Serial Interface Serial conguration interface / COM port (8-pin Mini-DIN): 9,600 - 115,000 baud, suitable

for optional connection of analog / GPRS modems. Supports internal COM-port server and

provides transparent asynchronous serial data transmission via TCP

WAN protocols

Ethernet PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-1,

RIP-2, VLAN, IP

Declaration of Conformity

Hereby, LANCOM Systems declares that this device is in compliance with Directives 2014/30/EU and 2014/35/EU.

The full text of the EU declaration of conformity is available at the following internet address:

www.lancom-systems.com/ce/

Package content

Documentation Hardware Quick Reference Guide (DE/EN); Installation Guide (DE/EN)

Cable 2 Ethernet cables, 3m

Power adapter External power adapter, NEST 12 V / 2 A DC/S, barrel connector 2.1 / 5.5 mm bayonet,

LANCOM item no. 111303 (not for WW devices)

This product contains separate open-source software components which are subject to their own licenses, in particular

the General Public License (GPL). The license information for the device rmware (LCOS) is available on the device‘s

WEBcong interface under “Extras > License information“. If the respective license demands, the source les for the

corresponding software components will be made available on a download server upon request.

a Power

Off Device switched off

Green, permanently* Device operational,

resp. device paired / claimed and LANCOM

Management Cloud (LMC) accessible

Red / green, blinking Conguration password not set. Without a

conguration password, the conguration

data in the device is unprotected.

Red, blinking Hardware error

Red, blinking slowly Time or charge limit reached/error message

occurred

1x green inverse

blinking*

Connection to the LMC active, pairing OK,

device not claimed

2x green inverse

blinking*

Pairing error, resp. LMC activation code

not available

3x green inverse

blinking*

LMC not accessible, resp. communication

error

b Online

Off WAN connection inactive

Green, permanently WAN connection active

Red, permanently WAN connection error

e VPN

Off No VPN connection active

Green, permanently VPN connection active

Green, blinking Establishing VPN connection

d ETH

Off No link

Green, permanently Network connection ready (link)

Green, ickering Data transmission

c WAN

Off Interface deactivated

Orange, blinking Synchronization with the modem

Orange, permanently Synchronization with the modem

successful

Green, permanently WAN connection established

Green, ickering WAN data transmission

Red / orange, blinking Hardware error, ext. modem

LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered

trademarks of their owners. Subject to change without notice. No liability for technical errors and/or omissions. 111789/0418

TECHNICAL DETAILS

MOUNTING AND CONNECTING THE DEVICE

LANCOM 1640E

Quick Reference Guide

LANCOM 1640E

WAN

ETH 2

Power

ETH 1

Online

ETH 3

VPN

*) The additional power LED statuses are displayed in 5-seconds

rotation if the device is congured to be managed by the LANCOM

Management Cloud.

a c d e fb

WAN interface

Connect the WAN interface to your WAN modem using the

enclosed ethernet cable with the dark green connectors.

Ethernet interface

Use the cable with the kiwi-colored connectors to connect one of

the interfaces ETH 1 to ETH 3 to your PC or a LAN switch.

Conguration interface

Conguring the device via the serial interface requires a serial

conguration cable (available as an accessory).

USB interface

You can use the USB interface to connect a USB printer or a

USB storage device.

Reset button

Pressed up to 5 seconds: device restart

Pressed until rst ashing up of all LEDs:

conguration reset and device restart

RESET

Power

When connecting the cable to the device, turn the bayonet

connector 90° clockwise until it clicks into place.

Use only the supplied power adapter.

Please observe the following when setting up the device

A For devices to be operated on the desktop, please attach the adhesive rubber

footpads

A Do not rest any objects on top of the device

A Do not obstruct the side ventilation slots

A In case of wall mounting, use the drilling template as supplied

A Rack installation with the optional LANCOM Rack Mount (not supplied)

a c d eb

Cloud-ready

Lancom 1640E Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lancom 1640E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info