Bedienungsanleitung Lancom 1783VAW (Seite 1 von 1) (Englisch)

681037

Zoom out

Zoom in

Vorherige Seite

1/1

Nächste Seite

Power

When connecting the

cable to the device, turn

the bayonet connector

90° clockwise until it

clicks into place.

Use only the supplied

power adapter.

Please observe the

following when setting

up the device

a For devices to be

operated on the

desktop, please attach

the adhesive rubber

footpads

a Do not rest any objects

on top of the device and

do not stack multiple

devices

a Keep the ventilation

slots on the side of

the device clear of

obstruction

a In case of wall

mounting, use the

drilling template as

suppliedn

a Rack installation with

the optional LANCOM

Rack Mount (not

supplied)

LANCOM 1681V

Power

VDSL

Online

ETH 1

ETH 2

VPN

ETH 3

ETH 4

ISDN Status

VDSL / ADSL interface

Use the supplied DSL cable

for the IP-based line to

connect the VDSL / ADSL

interface and the provider’s

telephone socket. For more

information, please contact

your Internet service

provider.

LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered

trademarks of their owners. Subject to change without notice. No liability for technical errors and/or omissions. 111634/0617

TECHNICAL DETAILS

Hardware

Power supply 12 V DC, external power adapter (230 V); bayonet connector to secure against disconnection

Power consumption Max. ca. 14 W

Environment Temperature range 0–35 °C, humidity 0–95 %; non-condensing

Housing Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock;

measures 210 x 45 x 140 mm (W x H x D)

Number of fans None; fanless design, no rotating parts, high MTBF

Interfaces LANCOM 1783VAW over ISDN / over POTS

WAN: VDSL2

A VDSL2 as per ITU G.993.2; proles 8a, 8b, 8c, 8d, 12a, 12b, 17a

A Compatible to VDSL2 from Deutsche Telekom AG (only over ISDN)

A ADSL conformity according to:

ADSL2+ over ISDN as per ITU G.992.5 Annex B/J with DPBO (POTS: Annex A/Annex M),

ADSL2 over ISDN as per ITU G.992.3 Annex B (POTS: Annex A/L),

ADSL over ISDN as per ITU G.992.1 Annex B (POTS: Annex A)

A Supports just one virtual connection at a time in ATM (VPI-VCI pair)

Wi-Fi

A Frequency band: 2400-2483.5 MHz (ISM) or 5150-5825 MHz (restrictions vary between countries)

A Radio channels 2.4 GHz: Up to 13 channels, max. 3 non-overlapping (2.4-GHz band)

A Radio channels 5 GHz: Up to 26 non-overlapping channels (channels available vary according to

country regulations; DFS for automatic dynamic channel selection required)

ETH 4 individual ports, 10 / 100 / 1000 Mbps Gigabit Ethernet, by default set to switch mode.

Up to 3 ports can be operated as additional WAN ports. Ethernet ports can be electrically disabled in

the LCOS conguration.

USB USB 2.0 hi-speed host port for connecting USB printers (USB print server), serial devices (COM-port

server) or USB drives (FAT le system)

ISDN 1 / ISDN 2 ISDN 1: Internal (NT) or external (TE) ISDN bus. This feature is controlled by LCOS. According to the

settings, connect the light-blue ISDN cable either to the NTBA or the ISDN terminal device.

ISDN 2: Internal (NT) ISDN bus. Use the light-blue ISDN cable to connect the ISDN device to the ISDN

interface;

Analog 1 / Analog 2 Use the cable of your analog devices to connect them with the analog interfaces. If necessary, use the

enclosed adapter.

Cong (Com) / V.24 Serial conguration interface / COM-port (8-pin mini-DIN): 9,600 - 115,200 baud, suitable for optio-

nal connection of analog/GPRS modems. Supports internal COM-port server and provides transparent

asynchronous serial-data transfer via TCP.

WAN protocols

VDSL, ADSL, Ethernet PPPoE, PPPoA, IPoA, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-

1, RIP-2, VLAN, GRE, EoGRE, L2TPv2 (LAC or LNS), IPv6 over PPP (IPv6 and

IPv4/IPv6 dual stack session), IP(v6)oE (autoconguration, DHCPv6 or static)

ISDN DSS1 (Euro-ISDN), PPP, X75, HDLC, ML-PPP, V.110/GSM/HSCSD

Declaration of Conformity

Hereby, LANCOM Systems declares that this radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU

declaration of conformity is available at the following internet address: www.lancom-systems.com/ce/

Package content

Manual Quick Reference Guide (DE/EN), Installation Guide (DE/EN)

Cable 1 Ethernet cable, 3 m (kiwi colored connectors); 1 DSL cable for an IP-based line, 4.25 m;

1 ISDN cable, 3 m (light-blue connectors)

Adapters 2 TAE adapters (RJ11 - TAE)

Power adapter External power supply adapter (230 V); NEST 12 V / 1.5 A DC/S; barrel connector 2.1 / 5.5 mm

bayonet; LANCOM Art.-Nr. 111301 (EU, 230 V); LANCOM Art.-Nr. 111302 (UK, 230 V)

MOUNTING AND CONNECTING THE DEVICE

i VPN

Off VPN connection inactive

Green, permanently VPN connection active

Green, ashing VPN connecting

e ISDN

Off Interface deactivated

Green, permanently D-channel active

Green, ickering ISDN data transfer

Red, ickering ISDN transfer error

Red/orange, blinking ISDN hardware error

a Power

Off Device switched off

Green, permanently* Device operational, resp. device paired /

claimed and LANCOM Management Cloud

(LMC) accessible

Green/red, blinking No password set. Without a password

the conguration data in the device is

unprotected.

Red, blinking Charge or time limit reached

1x green inverse

blinking*

Connection to the LMC active, pairing OK,

device not claimed

2x green inverse

blinking*

Pairing error, resp. LMC activation code

not available

3x green inverse

blinking*

LMC not accessible, resp. communication

error

b Online

Off WAN connection inactive

Green, permanently WAN connection active

Red, permanently WAN connection error

c DSL

Off Interface deactivated

Green, permanently DSL connection active

Green, ickering DSL data transfer

Red, ickering DSL transfer error

Red/orange, blinking DSL hardware error

Orange, blinking DSL training

Orange, permanently DSL sync

Green, blinking DSL connecting

d Analog

Off Interface deactivated

Green, permanently Interface activated

Orange, blinking Incoming call

Green, blinking Connection active

h VoIP

Off No SIP accounts dened or VCM is off

Green, permanently All dened and active SIP accounts (outgoing)

were successfully registered

Red, permanently Not all of the dened and active SIP accounts

were registered (possibly still in process)

Red or green,

inverse ashing

Number of currently used lines

(connecting or connected)

f ETH

Off No networking device attached

Green, permanently Connection to network device operational,

no data trafc

Green, ickering Data transmission

g WLAN

Off No Wi-Fi network dened or Wi-Fi module

deactivated. The Wi-Fi module is not

transmitting beacons.

Green, permanently At least one Wi-Fi network is dened and

Wi-Fi module activated. The Wi-Fi module

is transmitting beacons.

Green, blinking DFS scanning or other scan procedure

j Reset

Reset switch Operated e.g. with a paper clip

short press > Restart the device

long press > Reset the device

Analog interface

Connect analog terminal

devices to the analog

interfaces either directly

via RJ11 or with the help

of the enclosed TAE

adapter.

Serial interface

Conguring the device

via the serial interface

requires a serial

conguration cable

(available as an

accessory).

ISDN interface

ISDN 1

Internal (NT) or

external (TE) ISDN bus.

This feature is controlled

by LCOS.

ISDN 2

Internal (NT) ISDN-bus.

A 100-Ohm resistor for

line termination is

switchable in LCOS.

USB interface

You can use the USB

interface to connect

a USB printer or a

USB drive.

Ethernet interface

Use the cable with

the green-colored

connectors to connect

one of the interfaces

ETH 1 to ETH 4 to your

PC or a LAN switch.

d e f g

LANCOM 1783VAW

Quick Reference Guide

Cloud-ready

LANCOM 1783VAW

DSL

ETH 2

Power

ETH 1

Online

ISDN 1

ETH 4

ETH 3

VPN

Analog 1

Analog 2

ISDN 2

WLAN

Reset

VoIP

a c eb gfd ih j

*) The additional power LED statuses are displayed in 5-seconds

rotation if the device is congured to be managed by the LANCOM

Management Cloud.

This product contains separate open-source software components which are subject to their own licenses, in particular the

General Public License (GPL). The license information for the device rmware (LCOS) is available on the device‘s WEBcong

interface under “Extras > License information“. If the respective license demands, the source les for the corresponding software

components will be made available on a download server upon request.

Gigabit Ethernet 10/100/1000

ISDN 1 ISDN 2

TE / NT NT

Analog 1Analog 2

VDSL / ADSL

a b c d e f

Lancom 1783VAW Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lancom 1783VAW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info