Bedienungsanleitung Lancom 1790EF (Seite 4 von 6) (Englisch)

703318

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

3. Conﬁguration

Initial conﬁguration

To connect to the web interface of the device the administrator has to follow the steps mentioned in the ‘Installation

Guide -> Conﬁguration via WEBconﬁg’ which is being shipped with the product (or can be downloaded via the link

mentioned at ‘Device Documentation’). It is mandatory to do the initial conﬁguration via a single conﬁguration

device (e.g. notebook) and with no other network or device connected. Once you are physically connected to the

device, open a web browser and connect to the device conﬁguration page via HTTPS (it is mandatory to use HTTPS

whenever a web browser is used to access the device). Now you will see the startup wizard which will guide you

through the ﬁrst steps. Make sure to set the following values:

Startup wizard

Device name e.g. 1793 VAW

Password ********** Create a strong password (i.e. at least 8 characters containing alphabetic, numeric

and special characters).

Device access Local networks Set access to ‘Local networks‘ or ‘Local and remote networks (only via VPN)’.

DHCP Server Keeping ‘server’ is recommended to most customers.

IP address e.g. 172.16.1.1 Enter designated IP address for the device.

Netmask eg. 255.255.255.0 Enter designated net mask for the device.

Time configuration Time zone / Summer time /

Time server

It is recommended to use the predefined values. If necessary, please change accordingly.

LCOS auto update Installs FW updates

automatically

Leave at ‘Look for and install new LCOS versions’ to stay up to date with latest firmware updates.

LANCOM Management Cloud Enable If you wish to manage the device via the LANCOM Management Cloud, leave the checkbox

enabled.

Internet access conﬁguration

To set up an Internet connection, please use the Internet conﬁguration wizard (part of ‘Setup Wizards’ in

the menu tree) and follow the steps:

Internet configuration wizard

New connection ‘IPv4 & IPv6’ Configure either an IPv4 only or IPv4 & IPv6 (Dual Stack) connection

Note: Common providers use IPv4 & IPv6 based connections nowadays

Interface e.g. ‘VDSL’ Determine the interface on which the connection should be established

(e.g.VDSL)

Country e.g. ‘Germany’ Select the preferred country

Provider e.g. ‘Deutsche Telekom’ Select the preferred ISP

Access mode e.g. ‘Native IPv4 & IPv6

(Dual stack)’

Select the preferred access mode

Connection name ‘INTERNET‘ The connection name will be ‘INTERNET’ by default

word, terminal identification

and shared user ID

Type in the user credentials provided through your ISP

IPv6 parameters Automatically Let the device handle the IPv6 parameters automatically

Conﬁguration export

Conﬁguration scripts or ﬁles must be secured with a strong password (i.e. at least 8 characters containing alphabetic,

numeric and special characters).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lancom 1790EF Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lancom 1790EF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info