Bedienungsanleitung Lancom 1790EF (Seite 1 von 1) (Englisch)

703318

Zoom out

Zoom in

Vorherige Seite

1/1

Nächste Seite

Hardware

Power supply 12 V DC, external power adapter (110 or 230 V) with bayonet connector to secure against

disconnection

Power consumption Max. ca. 11 W

Environment Temperature range 0 – 40 °C; humidity 0 – 95 %; non-condensing

Housing Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; measures

210 x 45 x 140 mm (W x H x D)

Number of fans None; fanless design, no rotating parts, high MTBF

Interfaces

WAN 10 / 100 / 1000 Mbps Gigabit Ethernet

ETH 4 individual 10 / 100 / 1000-Mbps Fast Ethernet ports; operate as switch ex-factory.

Up to 3 ports can be switched as additional WAN ports.

USB USB 2.0 Hi-Speed host port for connecting USB printers (USB print server), serial devices

(COM-port servers), USB data media (FAT le system), or supported UMTS USB modems

SFP Socket for small form-factor pluggable Gigabit-Ethernet transceiver (mini-GBIC).

Compatible with optional LANCOM SFP modules for optical connections over short distances

(SX) or longer distances (LX). Set as a LAN port ex-factory, can be congured as a WAN port

Serial Interface Serial conguration interface / COM port (8-pin Mini-DIN): 9,600 - 115,000 baud, suitable for

optional connection of analog/GPRS modems. Supports internal COM-port server and provides

transparent asynchronous serial data transmission via TCP

WAN protocols

Ethernet PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-1,

RIP-2, VLAN, IP

Declaration of Conformity

Hereby, LANCOM Systems declares that this device is in compliance with Directives 2014/30/EU and 2014/35/EU.

The full text of the EU declaration of conformity is available at the following internet address:

www.lancom-systems.com/ce/

Package content

Documentation Hardware Quick Reference Guide (DE/EN); Installation Guide (DE/EN)

Cable 2 Ethernet cables, 3m (LAN: kiwi-colored connector; WAN: green connector)

Power adapter External power supply adapter (230 V); NEST 12 V / 2 A DC/S; barrel / bayonet (EU),

LANCOM item no. 111303 (not for WW devices)

This product contains separate open-source software components which are subject to their own licenses, in particular

the General Public License (GPL). The license information for the device rmware (LCOS) is available on the device‘s

WEBcong interface under “Extras > License information“. If the respective license demands, the source les for the

corresponding software components will be made available on a download server upon request.

a Power

Off Device switched off

Green, permanently* Device operational,

resp. device paired / claimed and LANCOM

Management Cloud (LMC) accessible

Red/green, blinking Conguration password not set. Without a

conguration password, the conguration

data in the device is unprotected.

Red, blinking Hardware error

Red, blinking slowly Time or charge limit reached/error message

occurred

1x green inverse

blinking*

Connection to the LMC active, pairing OK,

device not claimed

2x green inverse

blinking*

Pairing error, resp. LMC activation code

not available

3x green inverse

blinking*

LMC not accessible, resp. communication

error

b Online

Off WAN connection inactive

Green, permanently WAN connection active

Red, permanently WAN connection error

c SFP

Off SFP deactivated in the conguration

or SFP module present, no connection to

network device

Red, permanently SFP enabled in the conguration but no

SFP module present

Green, permanently SFP module present, connection to

network exists, no data transmission

Green, blinking Data transmission

Red, blinking SFP module present, hardware error

f VPN

Off No VPN connection active

Green, permanently VPN connection active

Green, blinking Establishing VPN connection

e ETH

Off No link

Green, permanently Network connection ready (link)

Green, ickering Data transmission

d WAN

Off Interface deactivated

Orange, blinking Synchronization with the modem

Orange, permanently Synchronization with the modem

successful

Green, permanently WAN connection established

Green, ickering WAN data transmission

Red/orange, blinking Hardware error, ext. modem

TECHNICAL DETAILS

MOUNTING AND CONNECTING THE DEVICE

LANCOM 1790EF

WAN

SFP

ETH 2

Power

ETH 1

Online

ETH 4

ETH 3

VPN

*) The additional power LED statuses are displayed in 5-seconds

rotation if the device is congured to be managed by the LANCOM

Management Cloud.

a c d e fb

Config (Com)ETH 3 ETH 2 ETH 1 DC 12 VResetUSBETH 4WAN

SFP

LANCOM 1790EF

Quick Reference Guide

Cloud-ready

a c d e f gb

SFP interface

Insert a suitable SFP module (e.g. 1000Base-SX or 1000Base-LX)

into the SFP port. Choose a cable compatible with the SFP module

and connect it as described in the module’s documentation. SFP

modulel and cable are not included.

WAN interface

Use the cable with the green connectors to connect the WAN

interface to your WAN modem..

Ethernet interfaces

Use the cable with the kiwi-colored connectors to connect one of

the interfaces ETH 1 to ETH 4 to your PC or a LAN switch.

Conguration interface

Use a serial conguration cable to connect the serial interface

(COM) to the serial interface of the device you want to use for

conguring / monitoring (separately available).

USB interface

Connect a USB data medium or a USB printer to the USB

interface. (USB cable not supplied)

Reset button

Pressed up to 5 seconds: device restart

Pressed until rst ashing up of all LEDs:

conguration reset and device restart

Power

After connecting the cable to the device, turn the bayonet

connector 90° clockwise until it clicks into place.

Use only the supplied power adapter.

Please observe the following when setting up the device

A Do not rest any objects on top of the device

A For devices to be operated on the desktop, please attach the

adhesive rubber footpads

A In case of wall mounting, use the drilling template as supplied

A Keep the ventilation slots on the side of the device clear

of obstruction

A Rack installation with the optional LANCOM Rack Mount

(separately available)

LANCOM 1681V

Power

VDSL

Online

ETH 1

ETH 2

VPN

ETH 3

ETH 4

ISDN Status

Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may

be trademarks or registered trademarks of their owners. This document contains statements relating to future products and their attributes.

LANCOM Systems reserves the right to change these without notice. No liability for technical errors and/or omissions. 111809/0419

Lancom 1790EF Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lancom 1790EF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info