Bedienungsanleitung Lancom 1926VAG-4G (Seite 1 von 1) (Englisch)

797099

Zoom out

Zoom in

Vorherige Seite

1/1

Nächste Seite

TECHNICAL DETAILS

Hardware

Power supply Internal power supply unit (100–240 V, 50-60 Hz)

Power consumption Max. 36 W

Environment Temperature range 0–40 °C, humidity 0–95 %; non-condensing

Housing Robust metal housing, 1 HU with mounting brackets for 19“ installation, W 345 x H 44 x D 253 mm)

Number of fans 1 quiet fan

Interfaces

G.FAST / VDSL 1 / VDSL 2 AG.FAST according to ITU G.9700 and G.9701, profiles 106a, 212a

AVDSL2 according to ITU G.993.2, profiles 8a, 8b, 8c, 8d, 12a, 12b, 17a, 35b

AVDSL supervectoring according to ITU G.993.2 (Annex Q)

AVDSL2 vectoring: according to ITU G.993.5 (G.Vector)

ACompatible with VDSL2 from Deutsche Telekom

ACompatible with the U-R2 connection of Deutsche Telekom (1TR112)

AADSL2+ over ISDN according to ITU G.992.5 Annex B/J with DPBO, ITU G.992.3 and ITU G.992.1

AADSL2+ over POTS according to ITU G.992.5 Annex A/M with DPBO, ITU G.992.3 and ITU G.992.1

ASupports only one virtual connection in ATM (VPI-VCI pair) at a time

AAutomatic detection of Deutsche Telekom VDSL connections with VLAN ID 7

WAN 1 / WAN 2 WAN 1 SFP: Compatible with optional LANCOM SFP modules. Set as a WAN port ex-factory, can be configured

as a LAN port.

WAN 1 / WAN 2 TP: 10 / 100 / 1000 Base-TX, autosensing full duplex (WAN 1) / autosensing (WAN 2), auto

node hub

ETH1 - ETH 4 4 individual ports, 10 / 100 / 1000 Mbps Gigabit Ethernet, by default set to switch mode. Up to 3 ports can be

operated as additional WAN ports. Ethernet ports can be electrically disabled in the LCOS configuration.

Analog 1 - Analog 4 Use the cables of your analog devices to connect them with the analog interfaces. If necessary, use the enclosed

adapters.

ISDN 1 / ISDN 2 ISDN 1: Internal (NT) ISDN bus. Connect the ISDN interface to an ISDN cable and the ISDN device.

ISDN 2: Internal (NT) ISDN bus. Connect the ISDN interface to an ISDN cable and the ISDN device.

Config (Com) / V.24 Serial configuration interface / COM-port: 9,600 - 115,200 baud

USB USB 2.0 hi-speed host port for connecting USB printers (USB print server), serial devices (COM-port server) or

USB drives (FAT file system)

4G Two SMA connectors for the supplied dipole rod antennas (LTE, UMTS), compatible LANCOM

AirLancer antennas for 4G, or from other manufacturers. Please respect the restrictions which apply in your

country when setting up an antenna system (particularly antenna gain / transmission power).

WAN protocols

G.FAST, VDSL, ADSL,

Ethernet

PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-1, RIP-2, VLAN, GRE,

EoGRE, L2TPv2 (LAC or LNS), IPv6 over PPP (IPv6 and IPv4/IPv6 dual stack session), IP(v6)oE (autoconfiguration,

DHCPv6 or static)

ISDN DSS1 (Euro-ISDN), PPP, X75, HDLC, ML-PPP, V.110/GSM/HSCSD

Data transmission in cellular networks

Supported standards UMTS, HSxPA, HSPA+, LTE, LTE Advanced

Supported cellular

network bands

Band 1 (2100 MHz), Band 3 (1800 MHz), Band 7 (2600 MHz), Band 8 (900 MHz), Band 20 (800 MHz), Band 28

(700 MHz), Band 32 (1500 MHz), Band 38 (2600 MHz), Band 40 (2300 MHz), Band 41 (2500 MHz), Band 42

(2500 MHz), Band 43 (2500 MHz)

Max. transmission power +23 dBm

Declaration of Conformity

Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with Directives

2014/30/EU, 2014/53/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of Conformity

is available at the following Internet address: www.lancom-systems.com/doc

Package content

Documentation Quick Reference Guide (DE/EN), Installation Guide (DE/EN)

Cables 2 DSL cables for IP-based connection, 4.25 m, or 2 DSL cables, 3 m (dark blue connectors), depending on the

version;

1 Ethernet cable, 3 m (kiwi colored connectors); 1 IEC power cord 230 V (not for WW devices)

Antennas Two LTE / 4G antennas for LTE / UMTS

Adapters 4 TAE adapters (RJ11 - TAE)

Mounting brackets Two 19” brackets for rack mounting

MOUNTING AND CONNECTING THE DEVICE

f ISDN 1 (NT) / ISDN 2 (NT)

Off Interface deactivated

Green, permanently D-channel active

Green, blinking ISDN connection active

Orange, blinking ISDN connecting

Green / orange, blinking

synchronously

ISDN hardware error

Orange, permanently Connection inactive

c G.FAST / VDSL 1 / VDSL 2

Off Interface deactivated

Green, blinking DSL connecting

Green, pemanently DSL connection active

Green, flickering DSL data transmission

Green / orange,

flickering

DSL transmission error

Green / orange, blinking

synchronously

DSL hardware error

Orange, blinking DSL training

Orange, permanently DSL sync

e ETH 1 - ETH 4

Green, orange off No networking device connected

Green, permanently Connection to network device operational,

no data traffic

Green, flickering Data transmission

Orange off 1000 Mbps

Orange, permanently 10 / 100 Mbps

d WAN 1 / WAN 2

Green, orange off No networking device connected

Green, permanently Connection to network device operational,

no data traffic

Green, flickering Data transmission

Orange off 1000 Mbps

Orange, permanently 10 / 100 Mbps

b RESET

Reset button Short press > restart the device

Long press > reset the device

*) The additional power LED statuses are displayed in 5-seconds rotation

if the device is configured to be managed by the LANCOM Management

Cloud.

This product contains separate open-source software components which

are subject to their own licenses, in particular the General Public License

(GPL). The license information for the device firmware (LCOS) is available

on the device‘s WEBconfig interface under “Extras > License information“.

If the respective license demands, the source files for the corresponding

software components will be made available on a download server upon

request.

a c eb fd

Please observe the following when setting up the device

AThe mains plug of the device must be freely accessible.

AFor devices to be operated on the desktop, please attach the adhesive rubber

footpads

ADo not rest any objects on top of the device and do not stack multiple devices

A Keep the ventilation slots on the side of the device clear of obstruction

AMount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets.

Pay attention to the “R” and “L” marks on the brackets for accurate mounting.

a4G / LTE antenna connectors

Connect the supplied cellular antennas to the connectors

at the front of the device.

bG.FAST / VDSL / ADSL interfaces*

If required, use the supplied DSL cables for the IP-based line to

connect each G.FAST / VDSL / ADSL interface to a separate provid-

er’s telephone socket. For more information, please contact your

Internet service provider.

* Please use the appropriate cables depending on the design

cWAN 1 interfaces (SFP / TP combo port)

Insert a suitable SFP module (e.g. 1000Base-SX or 1000Base-LX)

into the SFP port. Choose a cable compatible with the SFP module

and connect it as described in the module’s documentation. SFP

modulel and cable are not included.

If desired, alternatively connect the WAN 1 TP interface to a WAN

modem using an ethernet cable.

dWAN 2 interface (TP)

Connect the WAN 2 interface to a WAN modem using an Ethernet

cable.

eEthernet interface

Use the cable with the kiwi-colored connectors to connect one of

the interfaces ETH 1 to ETH 4 to your PC or a LAN switch.

fAnalog interfaces

Connect analog terminal devices to the analog interfaces either

directly via RJ11 or with the help of the enclosed TAE adapters.

gISDN interfaces

ISDN 1: Internal (NT) ISDN bus

ISDN 2: Internal (NT) ISDN-bus

A 100-Ohm resistor for line termination is

switchable in LCOS.

hSIM card slots

Slide the SIM card(s) into slot SIM1 or SIM2 using the marker

to ensure that the card is the right way round. Ensure that the

SIM card clicks into place on insertion. To remove the card from

the device, press the card lightly into the device.

Let go to release the SIM card from the slot. SIM

iConfiguration interface

Use the included serial configuration cable to connect the serial

interface (COM) to the serial interface of the device you want to

use for configuring / monitoring.

jUSB interface

You can use the USB interface to connect a USB printer or a

USB storage device.

Power connector and grounding point (device back side)

Supply power to the device via the power connector. Please

use the IEC power cable supplied (separately available for WW

devices).

ATTENTION: High touch current possible! Connect to earth

before connecting the power supply.

Warning! High touch current.

Connect to earth before

connecting the power supply.

bef

POWER

RESET

VPN

VoIP

VDSL 2 WAN 1 WAN 1 WAN 2 ETH 1 ETH 2 ETH 3 ETH 4 ANALOG 1 ANALOG 2 ANALOG 3 ANALOG 4 ISDN 1 (NT) ISDN 2 (NT)

SIM 2

SIM 1

COM USB

LANCOM 1926VAG-4G

Systems

G.FAST / VDSL 1

POWER

RESET

VPN

VoIP

VDSL 2 WAN 1 WAN 1 WAN 2 ETH 1 ETH 2 ETH 3 ETH 4 ANALOG 1 ANALOG 2 ANALOG 3 ANALOG 4 ISDN 1 (NT) ISDN 2 (NT)

SIM 2

SIM 1

COM USB

LANCOM 1926VAG-4G

Systems

G.FAST / VDSL 1

LANCOM 1926VAG-4G

Quick Reference Guide

Cloud-ready

Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!

Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document

contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 111963/0122

a 4G / VoIP / VPN / POWER

Off Cellular interface disabled

Green,permanently Connection to cellular network active

Green, flickering Cellular data transmission

Orange, permanently Logon to cellular network successful

Orange, blinking Logging on to cellular network

Red, permanently Hardware error / module unavailable

Red / green, blinking SIM card error (PIN)

Red / orange, blinking Uploading module firmware

VoIP

Off No SIP accounts defined or VCM is off

Green, permanently All defined and active SIP accounts

(outgoing) were successfully registered

Red, permanently Not all of the defined and active SIP accounts

were registered (possibly still in process)

Red or green, inverse

flashing

Number of currently used lines

(connecting or connected)

VPN

Off VPN connection inactive

Green, permanently VPN connection active

Green, flashing VPN connecting

POWER

Off Device switched off

Green, permanently* Device operational, resp. device paired /

claimed and LANCOM Management Cloud

(LMC) accessible

Green / red, blinking No password set. Without a password

the configuration data in the device is

unprotected.

Red, blinking Charge or time limit reached

1x green inverse blinking* Connection to the LMC active, pairing OK,

device not claimed

2x green inverse blinking* Pairing error, resp. LMC activation code not

available

3x green inverse blinking* LMC not accessible, resp. communication

error

Lancom 1926VAG-4G Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lancom 1926VAG-4G

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info