Bedienungsanleitung Lancom 884 VoIP (Seite 1 von 1) (Englisch)

703331

Zoom out

Zoom in

Vorherige Seite

1/1

Nächste Seite

MOUNTING AND CONNECTING THE DEVICE

TECHNICAL DETAILS

LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered

trademarks of their owners. Subject to change without notice. No liability for technical errors and/or omissions. 111717/0917

Please observe the fol-

lowing when setting up

the device

a For devices to be

operated on the

desktop, please attach

the adhesive rubber

footpads

a Do not rest any objects

on top of the device and

do not stack multiple

devices

a Keep the ventilation

slots on the side of

the device clear of

obstruction

a In case of wall

mounting, use the

drilling template as

supplied

a Rack installation with

the optional LANCOM

Rack Mount (not

supplied)

Hardware

Power supply 12 V DC, external power adapter (230 V); bayonet connector to secure against disconnection

Power consumption Max. ca. 14 W

Environment Temperature range 0–40 °C; humidity 0–95 %; non-condensing

Housing Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock;

measures 210 × 45 × 140 mm (W × H × D)

Number of fans None; fanless design, no rotating parts, high MTBF

Interfaces

WAN: VDSL2 a VDSL2 as per ITU G.993.2; proles 8a, 8b, 8c, 8d, 12a, 12b, 17a

a Compatible to VDSL2 from Deutsche Telekom

a ADSL conformity according to: ADSL2+ over ISDN as per ITU G.992.5 Annex B/J with DPBO,

ADSL2 over ISDN as per ITU G.992.3 Annex B, ADSL over ISDN as per ITU G.992.1 Annex B.

a Supports one virtual connection at a time in ATM (VPI-VCI pair)

ETH 4 individual ports, 10 / 100 / 1000 Mbps Gigabit Ethernet, by default set to switch mode.

Up to 3 ports can be operated as additional WAN ports. Ethernet ports can be electrically

disabled in the LCOS conguration.

USB USB 2.0 hi-speed host port for connecting USB printers (USB print server),

serial devices (COM-port server) or USB drives (FAT le system).

ISDN 1 / ISDN 2

ISDN 3 / ISDN 4

ISDN 1+2: Internal (NT) or external (TE) ISDN bus. This feature is controlled by LCOS.

ISDN 3+4: Internal (NT) ISDN bus.

Cong (Com) / V.24 Serial conguration interface / COM-port (8-pin mini-DIN): 9,600–115,200 baud, suitable

for optional connection of analog / GPRS modems. Supports internal COM-port server and

provides transparent asynchronous serial-data transfer via TCP.

WAN protocols

VDSL, ADSL, Ethernet PPPoE, PPPoA, IPoA, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP),

RIP-1, RIP-2, VLAN

ISDN DSS1 (Euro-ISDN), PPP, X75, HDLC, ML-PPP, V.110 / GSM / HSCSD

Declaration of Conformity

Hereby, LANCOM Systems declares that this device is in compliance with Directives 2014/30/EU and 2014/35/EU.

The full text of the EU declaration of conformity is available at the following internet address:

www.lancom-systems.com/ce/

Package content

Manual Quick Reference Guide (DE/EN), Installation Guide (DE/EN)

Cable 1 DSL cable for the IP-based line, 4.25m

Power adapter External power supply adapter (230V); NEST 12 V / 1.5 A DC/S;

barrel connector 2.1 / 5.5 mm bayonet; LANCOM item no. 111301

a Power

Off Device switched off

Green, permanently* Device operational,

resp. device paired / claimed and LANCOM

Management Cloud (LMC) accessible

Green / red, blinking No password set. Without a password

the conguration data in the device is

unprotected.

Red, blinking Charge or time limit reached

1x green inverse

blinking*

Connection to the LMC active, pairing OK,

claiming error

2x green inverse

blinking*

Pairing error, resp.

LMC activation code / PSK not available

3x green inverse

blinking*

LMC not accessible, resp.

communication error

b Online

Off WAN connection inactive

Green, permanently WAN connection active

Red, permanently WAN connection error

g VPN

Off VPN connection inactive

Green, permanently VPN connection active

Green, blinking VPN connecting

f VoIP

Off No SIP accounts dened or VCM is off

Green, permanently All dened and active SIP accounts (outgo-

ing) were successfully registered

Red, permanently Not all of the dened and active SIP

accounts were registered (possibly still in

process)

Red or green,

inverse ashing

Number of currently used lines ( connecting

or connected)

c DSL

Off Interface deactivated

Green, permanently DSL connection active

Green, ickering DSL data transfer

Red, ickering DSL transfer error

Red / orange, blinking DSL hardware error

Orange, blinking DSL training

Orange, permanently DSL sync

Green, blinking DSL connecting

d ISDN

Off Interface deactivated

Green, permanently D-channel active

Green, blinking ISDN connected

Red, ickering ISDN transfer error

Red / orange, blinking ISDN hardware error

Red, permanently ISDN connection not enabled

Orange, blinking ISDN connecting

e ETH

Off No networking device attached

Green, permanently Connection to network device operational,

no data trafc

Green, ickering Data transmission

LANCOM 1681V

Power

VDSL

Online

ETH 1

ETH 2

VPN

ETH 3

ETH 4

ISDN Status

h Reset

Reset button Operated e.g. with a paper clip

a short press: restart the device

a long press: reset the device

LANCOM 884 VoIP

Quick Reference Guide

This product contains separate open-source software components which are subject to their own licenses, in particular

the General Public License (GPL). The license information for the device rmware (LCOS) is available on the device‘s

WEBcong interface under “Extras > License information“. If the respective license demands, the source les for the

corresponding software components will be made available on a download server upon request.

*) The additional power LED statuses are displayed in 5-seconds

rotation if the device is congured to be managed by the LANCOM

Management Cloud.

fca

Gigabit Ethernet 10/100/1000

ISDN 3 ISDN 4

TE / NT NT

ISDN 1 ISDN 2

TE / NT NT

VDSL

VDSL interface

Use the supplied DSL cable for the

IP-based line to connect the VDSL

interface and the provider’s telephone

socket. For more information, please

contact your Internet service provider.

Ethernet interfaces

Connect one of the interfaces ETH 1 to

ETH 4 to your PC or a LAN switch.

Serial interface

Conguring the device via the serial

interface requires a serial congura-

tion cable (available as an accessory).

ISDN interfaces

ISDN 1 + 2

Internal (NT) or external (TE) ISDN-S

bus. This

feature is controlled by LCOS.

ISDN 3 + 4

Internal (NT) ISDN-S

bus.

A 100-Ohm resistor for line termination is

switchable in LCOS.

USB interface

You can use the USB interface to connect a

USB printer or a USB drive.

Power

After connecting the cable to the device, turn

the connector 90° clockwise to prevent it from

accidental un plugging.

Use only the supplied power adapter.

To prevent the device from overvoltage

damage, an overvoltage-protected power

supply is strongly recommended.

LANCOM 884 VoIP

DSL

ETH 2

Power

ETH 1

Online

ISDN 1

ETH 4

ETH 3

VPN

ISDN 2

Reset

ISDN 3

ISDN 4

VoIP

a c eb

Cloud-ready

Lancom 884 VoIP Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lancom 884 VoIP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info