5
a
b c d e f g
h
Green off No networking device attached
Green on
(permanently)
Connection to network device
operational, no data trafc
Flickering green Data transmission
Yellow off 1000 Mbps
Yellow on
(permanently)
10/100 Mbps
LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice. No liability for
technical errors and/or omissions. 110975/0612
1 Mount the device into
a 19” unit in a server
cabinet.
1 For devices to be
operated on the
desktop, please attach
the adhesive rubber
footpads
1 Do not rest any objects
on top of the device
1 Ensure that the
ventilation slots at
the back remain
unobstructed
f
Supply power to the
device.
Please use the IEC power
cable supplied.
Power supply Internal power supply unit (110-230 V, 50-60 Hz)
Power consumption 30 W
Environment Internal power supply unit (110–230 V, 50-60 Hz)
Housing Internal power supply unit (110–230 V, 50-60 Hz)
Number of fans 1
ETH 4 individual 10/100/1000-Mbps Fast Ethernet ports; up to 3 ports can be switched as additional WAN
ports with load balancing
USB USB 2.0 full- speed host port for connecting USB printers (USB print server) or serial devices (COM port
server); bi- directional data exchange is possible (max. 12 Mbps).
Cong (Com) Serial conguration interface / COM port (8 pin Mini-DIN): 9,600 - 115,000 baud, suitable for optional
connection of analog/GPRS modems
ISDN* ISDN S0 Bus
Ethernet PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and plain Ethernet (with or without DHCP), RIP- 1, RIP-2,
VLAN, IP
ISDN* 1TR6, DSS1 (Euro- ISDN), PPP, X75, HDLC, ML-PPP, V.110/GSM/HSCSD, CAPI 2.0 over LANCAPI, Stac data
compression
CE EN 55022, EN 55024, EN 60950
FCC FCC Class A Part 15
Manual Quick Reference Guide (DE, EN) and Quick Installation Guide (DE/EN/FR/ES/IT/PT/NL),
FCC Documentation (only US-Version)
CD/DVD CD with rmware, management software (LANcong, LANmonitor, LANCAPI) and documentation
Cable Serial conguration cable, 1.5m
Cable 2 Ethernet cables, 3m
Cable* ISDN cable, 3m
Cable IEC power cord
*) ISDN is not available in US version
a
Off Device switched off
Green on (permanently) Device operational
Blinking
green/orange
Conguration password not set. Without
a password the conguration data in the
device is unprotected.
Blinking red Charge or time limit reached
a
You can connect the
device to a PC with a
conguration cable.
d
You can use the USB
interface to connect a
USB printer or a USB ash
drive for device congura-
tion.
e
Use this switch to turn the
device on or off.
b
Use the cable with the
kiwi-colored connectors
to connect one of the in-
terfaces ETH1 to ETH4 to
your PC or a LAN switch.
Unplug the power plug from the power socket
to ensure that the device is completely sepa-
rated from the power supply!
b
Green on (permanently) CPU temperature OK
Orange on
(permanently)
CPU temperature > 55°
Blinking red Hardware failure of the fan or CPU tem-
perature > 60°; additional acoustic signal
c
Off No session logged on for the serial con-
guration interface
Green on
(permanently)
Serial conguration session logged on
Flickering orange Data transmission during the conguration
session
d
Red on (permanently) The LANCOM WLAN controller is not yet
operational; one of the following elements
is missing:
1 Root certicate
1 Device certicate
1 Current time
1 Random number for the DTLS encryption
Green on
(permanently)
At least one active access point connected
and authenticated.
Blinking red The device is operational but not con-
nected to an active access point.
g
Off No VPN connection active
Green on
(permanently)
VPN connection active
Blinking green Establishing VPN connections
f
Off No VRRP activated or VRRP acti-
vated and a predened virtual router
is set as Master
Green on
(permanently)
All dened virtual routers are on
standby
Red on
(permanently)
All virtual routers are deactivated
e
Off Backup is deactivated for all of
the WAN connections and virtual
routers.
Green on
(permanently)
Backup is activated for at least one
WAN connection or virtual router
c
Use the ISDN cable with
the light-blue connec-
tors to connect the ISDN
interface to the NTBA if
you wish to use ISDN in
addition.
h
