Bedienungsanleitung Lancom IL-2 (Seite 172 von 182) (Englisch)

680946

172

Zoom out

Zoom in

Vorherige Seite

1/182

Nächste Seite

Description of the menu options

ELSA LANCOM Wireless

R78

English

쮿

EAZ/MSN(s)

: This option allows you to enter the call numbers to which the

LANCAPI

is to respond. If you wish to enter more than one number, place a

semicolon between the individual numbers.

쮿

Prio-out

: The priority for a port controls the option for breaking outgoing

connections via the

LANCAPI

router connections. Option '1' does not break router

connections, the setting '2' breaks only auxiliary connections of a router connection

with channel bundling, the selection '3' also breaks main channels of a router

connection.

Setup/WLAN-module

the WLAN module is configured using this menu:

WLAN-Domain The WLAN domain is entered here, i.e. the symbolic name that the

mobile stations use to find the base port. An ASCII string with a

maximum of 32 characters. The default setting is 'ELSA'.

Phy-channel The radio channel to be used by the base port. The possible values

are 1 to 14. However, the channels overlap due to the spread-

spectrum process, so that the entire radio band offers a maximum of 3

completely independent channels.

Not all channels are permitted in all countries (please see the table of

radio channels in the Appendix).

Packet size A value between 600 and 1600 that states the maximum size of

WLAN packets in bytes. Default: 1550.

Access-list This list can be used to explicitly exclude WLAN stations from data

communications with the LAN/base port. Alternatively, authorized

stations can be specified.

Enter the MAC addresses of stations in this list – in other words, the

12-character hexadecimal numbers printed on the cards – but without

separators, i.e. 00-60-B3-1F-02-11 would become 0060B31F0211.

This only denies the stations access to the LAN or WAN. Data

communications between stations in the WLAN via the base port –

which typically serves as a relay – is not affected.

Access-mode This positive/negative switch determines whether the list is to serve

as an authorization or exclusion. By default, the mode is set to

negative and the access list is empty, i.e. no stations are excluded

from data communications.

Protocol-list This list permits data packets to be blocked or permitted (depending

on the positive/negative setting of the switch) on the basis of their

protocol.

Every Ethernet frame contains a 16-bit identifier stating the Layer-3

protocol of its data. These can be entered in the list as hexadecimal

numbers.

Common protocols include:

0800 = IP

0806 = IP/ARP

8137 = IPX F0F0,

E0E0 = IPX

809B and 80F3 = Appletalk

6001 to 6007 = Decnet

80D5 and 0808 to 0D0D = IBM SNA

In this case as well, traffic is blocked between WLAN stations and the

LAN or WAN, but not between the WLAN stations themselves.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lancom IL-2 Seite 172

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lancom IL-2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info