Accessories2 Ethernet cables 3 m (kiwi colored connectors); 1 serial conguration cable 1.5 m;
2 IEC power cords 230 V (not for WW devices);
1 set of mounting rails with accessories for xing the device in a 19“ rack; 1x 19“ bracket
MOUNTING AND CONNECTING THE DEVICE
*) The additional status LED statuses are displayed in 5-seconds
rotation if the device is congured to be managed by the LANCOM
Management Cloud.
LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks
of their owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for
technical errors and / or omissions. 111879/0120
LANCOM ISG-8000
Quick Reference Guide
Cloud-ready
a
Serial conguration interface
Use the included serial conguration cable to connect the serial
interface (COM) to the serial interface of the device you want to
use for conguring / monitoring.
b
USB interfaces
You can use the USB interfaces to connect USB printers or USB
storage devices.
c
Reset button
Pressed up to 5 seconds: device restart
Pressed longer than 5 seconds:
conguration reset and device restart
d
TP Ethernet interfaces
Connect the ETH 1 - ETH 8 TP Ethernet interfaces to your PC or a
LAN switch using one of the enclosed cables with the kiwi-colored
connectors.
e
SFP+ interfaces (10G / 1G)
Insert suitable SFP modules into the SFP ports ETH 9 - ETH 10.
Choose cables compatible with the SFP modules and connect
them as described in the module’s documentation.
SFP modules and cables are not included.
f
g
Power supply modules (device back side)
Supply power to the device via the power supply modules
connectors. Please use the IEC power cable supplied (separately
available for WW devices).
Removing the power supply modules
To remove a power supply module from the device move the
release lever to the right and pull out the modules using the
handle.
4
Please observe the following when setting up the device
AThe mains plug of the device must be freely accessible.
AFor devices to be operated on the desktop, please attach the adhesive rubber
footpads.
ADo not rest any objects on top of the device and do not stack multiple devices.
A Keep the ventilation slots on the side of the device clear of obstruction.
AMount the device into a 19” unit in a server cabinet using the provided screws and mounting rails.
dETH 1 - ETH 8 - TP (one green and orange LED each)
Both LEDs offNo networking device attached
Green, permanentlyConnection to network device operational,
no data trafc
Green, ickeringData transmission
Orange off1000 Mbps
Orange, permanently100 Mbps
aPower- / Status- / HDD LEDs
Power: offDevice switched off
Power: green,
permanently
Device operational
Statrus: green,
permanently*
Device operational, resp. device paired /
claimed and LANCOM Management Cloud
(LMC) accessible
Status: green / red,
blinking
No password set. Without a password
the conguration data in the device is
unprotected.
Status: red, blinkingCharge or time limit reached
Status: 1x green,
inverse blinking*
Connection to the LMC active, pairing OK,
device not claimed
Status: 2x green,
inverse blinking*
Pairing error, resp. LMC activation code
not available
Status: 3x green,
inverse blinking*
LMC not accessible, resp. communication
error
HDD: offno HDD read- / write access
HDD: green, ickeringHDD read- / write access
bLCD display (rotating in two lines)
ADevice name
AFirmware version
ADevice temperature
ADate and time
ACPU load
AMemory usage
ANumber of VPN tunnels)
AData transfer in reception direction
AData transfer in transmission direction
This product contains separate open-source software components which are subject to their own licenses, in particular
the General Public License (GPL). The license information for the device rmware (LCOS) is available on the device‘s
WEBcong interface under “Extras > License information“. If the respective license demands, the source les for the
corresponding software components will be made available on a download server upon request.
eETH 9 - ETH 10 - SFP+ (one orange LED each)
OffNo networking device attached
Orange, permanentlyConnection to network device operational,
no data transmission
Orange, ickeringData transmission
ISG-8000
ETH 9ETH 10
a
be
c
d
ISG-8000
ETH 9ETH 10
a
cde
ISG-8000
ETH 9ETH 10
b
cDisplay buttons A - D
All buttons are fully congurable
F
F
G
G
Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!
Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
Detailed mounting instructions can be found under www.lancom-systems.com in the product area for this device under ‘downloads’.
Brauchen Sie Hilfe? Stellen Sie Ihre Frage.
Missbrauch melden von Frage und/oder Antwort
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Lancom ISG-8000 wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.