Bedienungsanleitung Lancom R884VA (Seite 1 von 1) (Englisch)

680883

Zoom out

Zoom in

Vorherige Seite

1/1

Nächste Seite

MOUNTING AND CONNECTING THE DEVICE

TECHNICAL DETAILS

LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered

trademarks of their owners. Subject to change without notice. No liability for technical errors and/or omissions. 111635/0418

Hardware

Power supply 12 V DC, external power adapter (230 V); bayonet connector to secure against disconnection

Power consumption Max. ca. 14 W

Environment Temperature range 0–40 °C; humidity 0–95 %; non-condensing

Housing Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; measures

210 x 45 x 140 mm (W x H x D)

Number of fans None; fanless design, no rotating parts, high MTBF

Interfaces

WAN: VDSL2 A VDSL2 as per ITU G.993.2; proles 8a, 8b, 8c, 8d, 12a, 12b, 17a

A Compatible to VDSL2 from Deutsche Telekom

A ADSL conformity according to: ADSL2+ over ISDN as per ITU G.992.5 Annex B/J with DPBO,

ADSL2 over ISDN as per ITU G.992.3 Annex B, ADSL over ISDN as per ITU G.992.1 Annex B.

A Supports just one virtual connection at a time in ATM (VPI-VCI pair)

ETH 4 individual ports, 10 / 100 / 1000 Mbps Gigabit Ethernet, by default set to switch mode.

Up to 3 ports can be operated as additional WAN ports. Ethernet ports can be electrically

disabled in the LCOS conguration.

USB USB 2.0 hi-speed host port for connecting USB printers (USB print server),

serial devices (COM-port server) or USB drives (FAT le system).

ISDN 1 / ISDN 2

ISDN 3 / ISDN 4

ISDN 1+2: Internal (NT) or external (TE) ISDN bus. This feature is controlled by LCOS.

According to the settings, connect the light-blue ISDN cable either to the NTBA or the ISDN

terminal device.

ISDN 3+4: Internal (NT) ISDN bus. Use the light-blue ISDN cable to connect the ISDN device to

the ISDN interface.

Cong (Com) / V.24 Serial conguration interface / COM-port (8-pin mini-DIN): 9,600 - 115,200 baud, suitable

for optional connection of analog / GPRS modems. Supports internal COM-port server and

provides transparent asynchronous serial-data transfer via TCP.

WAN protocols

VDSL, ADSL, Ethernet PPPoE, PPPoA, IPoA, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without

DHCP), RIP-1, RIP-2, VLAN

ISDN DSS1 (Euro-ISDN), PPP, X75, HDLC, ML-PPP, V.110/GSM/HSCSD

Declaration of Conformity

Hereby, LANCOM Systems declares that this device is in compliance with Directives 2014/30/EU and 2014/35/EU.

The full text of the EU declaration of conformity is available at the following internet address:

www.lancom-systems.com/ce/

Package content

Documentation Quick Reference Guide (DE/EN), Installation Guide (DE/EN)

Cable 1 Ethernet cable, 3 m (kiwi colored connectors); 1 DSL cable for an IP-based line, 4.25 m;

2 ISDN cables, 3 m (light-blue connectors)

Power adapter External power supply adapter (230 V); NEST 12 V / 1.5 A DC/S; barrel connector 2.1 / 5.5 mm

bayonet; LANCOM item no. 111301

a Power

Off Device switched off

Green, permanently* Device operational, resp. device paired /

claimed and LANCOM Management Cloud

(LMC) accessible

Green / red, blinking No password set. Without a password

the conguration data in the device is

unprotected.

Red, blinking Charge or time limit reached

1x green inverse

blinking*

Connection to the LMC active, pairing OK,

device not claimed

2x green inverse

blinking*

Pairing error, resp. LMC activation code

not available

3x green inverse

blinking*

LMC not accessible, resp. communication

error

b Online

Off WAN connection inactive

Green, permanently WAN connection active

Red, permanently WAN connection error

g VPN

Off VPN connection inactive

Green, permanently VPN connection active

Green, ashing VPN connecting

f VoIP

Off No SIP accounts dened or VCM is off

Green, permanently All dened and active SIP accounts

(outgoing) were successfully registered

Red, permanently Not all of the dened and active SIP

accounts were registered

(possibly still in process)

Red or green,

inverse ashing

Number of currently used lines

(connecting or connected)

c DSL

Off Interface deactivated

Green, permanently DSL connection active

Green, ickering DSL data transfer

Red, ickering DSL transfer error

Red / orange, blinking DSL hardware error

Orange, blinking DSL training

Orange, permanently DSL sync

Green, blinking DSL connecting

d ISDN

Off Interface deactivated

Green, permanently D-channel active

Green, blinking ISDN connected

Red, ickering ISDN transfer error

Red / orange, blinking ISDN hardware error

Red, permanently ISDN connection not enabled

Orange, blinking ISDN connecting

e ETH

Off No networking device attached

Green, permanently Connection to network device

operational, no data trafc

Green, ickering Data transmission

h Reset

Reset switch Operated e.g. with a paper clip

short press > Restart the device

long press > Reset the device

This product contains separate open-source software components which are subject to their own licenses, in particular

the General Public License (GPL). The license information for the device rmware (LCOS) is available on the device‘s

WEBcong interface under “Extras > License information“. If the respective license demands, the source les for the

corresponding software components will be made available on a download server upon request.

a c eb gfd h

LANCOM R884VA

DSL

ETH 2

Power

ETH 1

Online

ISDN 1

ETH 4

ETH 3

VPN

ISDN 2

Reset

ISDN 3

ISDN 4

VoIP

LANCOM R884VA

Quick Reference Guide

Cloud-ready

Gigabit Ethernet 10/100/1000

ISDN 3 ISDN 4

TE / NT NT

ISDN 1 ISDN 2

TE / NT NT

VDSL / ADSL

d e fa b c

Please observe the following when setting up the device

A Do not rest any objects on top of the device

A For devices to be operated on the desktop, please attach the

adhesive rubber footpads

A In case of wall mounting, use the drilling template as supplied

A Keep the ventilation slots on the side of the device clear

of obstruction

A Rack installation with the optional LANCOM Rack Mount

(separately available)

LANCOM 1681V

Power

VDSL

Online

ETH 1

ETH 2

VPN

ETH 3

ETH 4

ISDN Status

VDSL interface

Use the supplied DSL cable for the IP-based line to connect the

VDSL interface and the provider’s telephone socket. For more

infor mation, please contact your Internet service provider.

Ethernet interfaces

Use the cable with the kiwi-colored connectors to connect one of

the interfaces ETH 1 to ETH 4 to your PC, IP telephone or a LAN

switch.

Conguration interface

Use a serial conguration cable to connect the serial interface

(COM) to the serial interface of the device you want to use for

conguring / monitoring (separately available).

ISDN interfaces

ISDN 1 + 2

Internal (NT) or external (TE) ISDN bus.

This feature is controlled by LCOS.

ISDN 3 + 4

Internal (NT) ISDN bus.

A 100-Ohm resistor

for line termination is

switchable in LCOS.

USB interface

You can use the USB interface to connect a USB printer or a

USB memory stick.

Power

After connecting the cable to the device, turn the bayonet

connector 90° clockwise until it clicks into place.

Use only the supplied power adapter.

*) The additional power LED statuses are displayed in 5-seconds

rotation if the device is congured to be managed by the LANCOM

Management Cloud.

Lancom R884VA Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lancom R884VA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info