Bedienungsanleitung Landmann 12660 - Miton 4.1 (Seite 9 von 28) (Englisch)

685307

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Miton PTS 4.1

Disconnecting the gas cylinder

1. Close the cylinder valve.

2. Store the pressure regulator with the gas hose

under the barbecue. Make sure the gas hose is

not kinked or twisted in any way.

3. Store the gas cylinder correctly:

– Fit the gas cylinder valve with a cap nut and

safety cap.

Do not store the gas cylinder in rooms below

ground level, in or near stairways, hallways

or passages and thoroughfares between buil-

dings.

Always store gas cylinders upright, even if they

are empty!

Connecting the gas cylinder

1. Connect the coupling nut of the pressure regula-

tor to the cylinder valve thread and tighten the

coupling nut by turning it anti-clockwise by hand.

2. Do not use any tools for this, as the cylinder valve

seal could be damaged in the process, resulting in

leaks.

3. Make sure that the pressure regulator and the gas

hose are securely connected.

4. Check to make sure the connection between the

gas hose and adjusting element, as well as the

connections between the gas hose are secure.

Make sure that the hose is not kinked or twisted in

any way and that it is not under tension.

5. Open the cylinder valve and use a standard leak

detector to make sure that all of the connections

are tight.

– Please observe the instructions for the leak indi-

cator! Never check for leaks using a naked ﬂa-

me. Listening for leaks is not a reliable method

of detection.

– If a leak is detected, close the cylinder valve

immediately and tighten the loose connection

or replace the leaking part. Repeat the leak

test.

6. If you do not wish to barbecue immediately, close

the cylinder valve.

Before starting

• Select a suitable, preferably wind-sheltered area

to set up the barbecue. Make sure that ...

– there are not, and will not be, any ﬂammable

materials or substances nearby. The minimum

distance to ﬂammable materials or substances

must be 2 m overhead and 1 m to the side of

the barbecue; the distance to ﬂame-resistant

materials or substances must be at least 0.25 m.

– the barbecue is positioned ﬁrmly on a sufﬁci-

ently large area. It must not be moved during

operation.

– Never lay the gas cylinder on its side.

– Do not kink the gas hose or apply a tension to it.

• Make sure that the seal in the pressure regulator

is present and intact. Do not use any additional

seals.

• When connecting the gas cylinder ensure that the-

re are no sources of ignition within a 5 m radius.

Important note: to avoid the risk of spark-over, do

not to light naked ﬂames, do not smoke and do

not actuate the switches of electric devices (appli-

ances, lights, door bells, etc.).

Battery

1. Unscrew the cover on the battery compartment

anti-clockwise.

2. Insert a new (type AA) battery, observing correct

polarity. Use only type AA batteries.

3. Screw the cover back onto the battery compart-

ment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Landmann 12660 - Miton 4.1 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info