Bedienungsanleitung Laser 5089 (Seite 4 von 18) (Englisch)

694703

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Laser 5089 Code Reader User’s Guide_ Laser 5089 Code Reader User’s Guide_

And always use your code reader as described in the user’s manual, and follow

all safety messages.

WARNING

Do not route the test cable in a manner that would interfere with

driving controls.

WARNING

Do not exceed voltage limits between inputs speciﬁed in this user’s

manual.

WARNING

Always wear ANSI approved goggles to protect your eyes from

propelled objects as well as hot or caustic liquids.

WARNING

Fuel, oil vapors, hot steam, hot toxic exhaust gases, acid, refrigerant

and other debris produced by a malfunction engine can cause serious injury or

death. Do not use code reader in areas where explosive vapor may collect, such

as in below-ground pits, conﬁned areas, or areas that are less than 18 inches (45

cm) above the ﬂoor.

WARNING

Do not smoke, strike a match, or cause a spark near the vehicle

while testing and keep all sparks, heated items and open ﬂames away from the

battery and fuel / fuel vapors as they are highly ﬂammable.

WARNING

Keep a dry chemical ﬁre extinguisher suitable for gasoline, chemical

and electrical ﬁres in work area.

WARNING

Always be aware of rotating parts that move at high speed when an

engine is running and keep a safe distance from these parts as well as other

potentially moving objects to avoid serious injury.

WARNING

Do not touch engine components that get very hot when an engine

is running to avoid severe burns.

WARNING

Block drive wheels before testing with engine running. Put the

transmission in park (for automatic transmission) or neutral (for manual

transmission). And never leave a running engine unattended.

WARNING

Do not wear jewelry or loose ﬁtting clothing when working on

engine.

WARNING

Make sure to turn off ignition before connecting or disconnecting

the code reader.

2.2 Important Safety Instructions

We provide instructions for the usage of your code reader in this manual.

Below is a list of conventions we used in the manual.

Safety Information

See Safety Information on page 5.

Bold Text

Bold emphasis is used in procedures to highlight selectable items such as

buttons and menu options.

Example:

Use the SCROLL key to select the desired measurement unit.

Bold-Italic Text

Bold-italic text is used in the procedures to highlight the menus on the code

reader screen.

Example:

Use the SCROLL key to select Language from System Setup screen.

Symbols and Icons

√ Check Note

Additional information about the subject in the preceding paragraph is

introduced by a √ Check Note.

Example:

√ The code reader is set to display English menus by default.

• Solid Spot

Operation tips and lists that apply to speciﬁc tool are introduced by a solid spot •.

Example:

System Setup allows you to:

• Select menu languages.

• Change measurement unit.

• Adjust display contrast.

3. Using This Manual

6 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Laser 5089 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info