Bedienungsanleitung Laserliner DigiLevel Pro 30 (Seite 6 von 19) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch)

646122

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

DigiLevel Pro 30/60/120

Memory functions:

• With the memory function (6), the current measurement result can be

saved in the internal memory, whereby the current memory position

(M1 - M9) is displayed during the saving process (9).

• If more than 9 results are saved, the old ones are overwritten.

• The memory retrieval button (4) can be pressed to show the most

recently saved result in the display (8). By repeatingly pressing the

memory retrieval button (4), all the stored results (9) can be retrieved.

• Return to normal (6)

Laser radiation!

Do not stare into the beam!

Class 2 laser

< 1 mW · 650 nm

EN 60825-1:2007-10

Warranty:

The warranty is valid for 2 years from the date of purchase. The warranty does

not cover damage caused by improper use or storage, normal wear and tear, or

defects which only insigniﬁ cantly impair the value of the product or its

functioning. Any tampering by unauthorised persons will render this warranty

void. In the event that you need to claim warranty, please take the complete

device together with all information and the invoice to one of our dealers or send

it in to UMAREX-Laserliner.

Electronic measuring

precision:

+/- 0,1° at 0° and 90°,

+/- 0,2° at 2° – 89°

Display accuracy 0°- 1° 2 decimal places

Display accuracy 1°-90° 1 decimal place

Vial accuracy

0,5 mm/m

Laser class 2 < 1 mW (EN 60825-1:2007-10)

Laser wavelength 650 nm

Working temperature 0°C...40°C (32°F...104°F)

Storage temperature -20°C ... 65°C

Power supply 2 x 1.5V (Typ AAA/LR03)

Dimensions 30 60 x 33 x 300 mm

Dimensions 60 60 x 33 x 610 mm

Dimensions 120 60 x 33 x 1220 mm

Weight 30/ 60/ 120 0,4 / 0,8 / 1,2 kg

Article-No. 30/ 60/ 120 081.212A/ 081.210A/ 081.216A

Subject to technical change without notice 10.2008

Technical data:

Spirit level function:

• The alignment to the measuring surface (14) is shown by the vertical and

horizontal vials (11, 12).

• Use the vials for optimum vertical and horizontal alignment, and the

electronic slope angle display for any desired angle of slope.

• With the aid of the magnets (13), the DigiLevel Pro can be afﬁ xed to any

magnetic surface.

Calibration:

• (A) Place the unit with its measuring edge (14) down on a straight sur-

face and mark the positions of the unit‘s ends on the underlying surface

(see Fig. below). Switch the unit on (2) and press the REF button (1) until

CAL 1 starts blinking. Shortly thereafter an acoustic signal will sound and

CAL 2 will appear in the display. Now turn the unit around horizontally

(end-for-end) by 180° (B) such that its ends are positioned opposite where

they previously were but again exactly at the underlying surface marks

(reverse measurement). Again press the REF button (1) until CAL 2 blinks.

The subsequent acoustic signal concludes the process.

• Follow-up test: The unit is properly calibrated when it displays the same

measurement value, i.e. the underlying surface‘s deviation from absolute

level, in both positions (0° and 180°).

Switching off:

• To switch off the DigiLevel, press the on/off switch (2) for at least

3 secs. When not in use, the DigiLevel switches off automatically.

(A)

(B)

0°

180°

General safety instructions

Attention: Do not look directly into the laser beam! The laser may not

get into the hands of children! Do not point this device unnecessarily

toward persons.

Note: Regularly check the unit‘s calibration before use, after transporting

and extended periods of storage.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Laserliner DigiLevel Pro 30 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info