646792
20
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
20
GB
Brief instructions
Initial switch-on Use the ON/OFF button to switch the device on. The
automatic sensor now levels the device horizontally and/
or vertically; the laser remains stationary and flashes
during this set-up phase. As soon as levelling is comple-
te, the laser starts to rotate at 750 rpm.
Hand receiver
mode
For working with the laser receiver (available as an
optional extra).
Rotary mode The following speeds can be set using the rotary button:
750, 350, 0 rpm
Spot mode You access spot mode by pressing the rotary button
repeatedly until the laser stops rotating. The laser can
then be positioned exactly at the measuring point by
means of the direction buttons.
Scan mode The scan button can be used to activate and set a light-
intensive segment in 4 different widths. You position the
segment via the direction buttons.
ADS tilt
function
This function protects the rotary laser from changes
in position caused by the device being disturbed by
external factors, thus preventing erroneous or inaccu-
rate measurements. Press the tilt button as soon as the
rotary laser has been aligned and the automatic sensor
is up and running. The tilt function becomes active after
around 30 seconds and the tilt LED starts to flash every
second. If the device then moves, it will switch itself off.
The laser and the tilt LED start to flash rapidly.
Anti-shake
function
The device can be set up really quickly with this func-
tion, which enables the laser to be set to a required
height, for example. It also means that the laser can
be used on vibrating surfaces and in windy conditions,
possibly in conjunction with the single slope function.
The laser will continue to rotate whilst the automatic
sensor is setting up the device. IMPORTANT: Precision is
adversely affected during the set-up phase.
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Laserliner Revolution wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info