ᕡ
ᕢ
5
Angora/Wool
● Steam iron about 10 cm from the
surface of the material, in order
not to damage it.
● Shake the garment by hand so that
it regains its normal volume.
Vertical removal of creases
Hand the garment on a coat hanger or
hold it up.
With a sweeping movement from top to
bottom lightly touch the material while
giving short bursts of steam.
Note: It is easy to remove creases from
most materials,except for cotton,linen and
some silks.
If it is difficult to remove the creases from a
material, iron it as normal on the ironing
board.
Special materials
● Velvet,Corduroy, Jersey
● If you are not using a Teflon® soleplate, steam
iron 1 cm from the surface of the material,then
smooth by hand.
CAUTION
Using a hot iron with steam under pressure
can cause severe burns.
Using the Teflon® soleplate
Practical hints
The Teflon® soleplate must be used for dark materials that are likely to become shiny and synthetic materials that might stick
to the soleplate.
To use the Teflon® soleplate: 1.Place the iron in the soleplate.2.Pull the spring towards the end of the iron as shown in the draw-
ing.Wait for about 1 minute for the soleplate to reach the same temperature as the iron.This avoids droplets of condensation falling
onto the material. Do not forget to remove the Teflon® soleplate after use.
CAUTION: Contact with the Teflon soleplate can cause severe burns and damage nearby objects.
English
