10
Steam is escaping from the filling
cap
The iron is not getting hot
The iron is too hot
The handle is becoming hot
Steam keeps coming out of the
iron
Steam comes out irregularly
The steam is not under pressure
• The cap is not screwed on properly
• The cap is broken
• The mains plug is not pushed into the
wall socket
• The switches are switched off
• The thermostat is set to minimum
• The thermostat is badly adjusted
• The thermostat is set to maximum
• The iron switch is stuck
• The monotube is broken
• The holes in the soleplate are blocked
• The steam generator is empty
• Retighten the cap correctly
•
Do not use your unit any more and
contact your customer service agent
• Plug the mains into the wall socket
• Switch on the switches
• Adjust the thermostat correctly
• Lower the temperature using the
thermostat
• Lower the temperature using the
thermostat
• Depress the steam control button
rapidly and repeatedly
• Call your customer service agent
• As soon as the iron is cold clean
them
• Refill the steam generator
Technical Data
Problems
Possible causes Solutions
Steam pressure 3,5 bar
Vertical ironing Yes
Steam generator capacity 0,85 l
Able to use tap water Yes
Mains supply 230V / 50 Hz
Steam generator power 1000 W
Iron power 800 W
Total weight 13.5 kg
Weight of iron 1 kg
Dimensions of the closed unit H135x W44xD18 cm
Height of the table 65-94 cm
English
