Bedienungsanleitung Lavorwash STM 160 Kit 2 (Seite 11 von 136) (Alle Sprachen)

733407

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

correctly, that is to say without any water

leak.

> SWITCHING OFF

See fig.

CARE AND MAINTENANCE

See fig.

The unit is maintenance-free.



XX WARNING: the machine shall be

disconnected from its power source, by

removing the plug from the socket-

outlet, during cleaning or maintenance

 WARNING: Do not spray the appliance

with water and do not use detergents or

aggressive solvents. Machine could be

damaged.

Clean the exterior part of the machine with a dry

cloth.

> STORAGE

See fig.

· Move the machine only by grasping the

carrying handle

· Store the appliance and the accessories in a

frost-safe room.

TROUBLESHOOTING

Appliance does not work

· Check whether the voltage shown on the

rating plate corresponds to that of the power

source.

· Check the connector cable for damage.

Appliance does not reach operational pressure

· Vent the appliance: allow the pump to

operate without the high-pressure hose until

water appears at the high-pressure outlet

without any more bubbles. Then reattach

the high-pressure hose.

· Clean the strainer in the water connection.

· Clean the filter placed inside the hose

coupling (if set)

· Check the inlet water flow rate.

· Check all inlet pipes to the pump for leaks or

blockage.

Strong pressure fluctuations

· Clean the high-pressure nozzle. Remove dirt

from the nozzle hole with a needle and then

rinse out with water from the front.

Pump leaks

· 10 drops per minute are permissible. In the

case of more serious leakage, you should

contact the authorized customer service.

Replacement parts

· Use only original spare parts or spare parts

suggested by the manufacturer.

WARRANTY CONDITIONS

All our machines are subjected to strict tests

and are covered against manufacturing de-

fects in accordance with applicable regula-

tions. The warranty is eﬀective from the date

of purchase.

The following are not included in the war-

ranty: - Parts subject to normal wear. - Rub-

ber parts, charcoal, ﬁlters and the accessories

and optional accessories. - Accidental damage,

caused by transport, neglect or inadequate

treatment, incorrect or improper use and in-

stallation failing - The warranty shall not cover

any cleaning operations to which the opera-

tive components may be subjected, such as

clogged nozzles and ﬁlter blocked due to lime-

stones. This machine is intended to be used for

domestic and hobby work: the warranty does

not cover any other diﬀerent kind of use.

DISPOSAL WEEE

As the owner of electrical or electronic

equipment, the law (in accordance

with the EU Directive 2002/96/EC of

27 January 2003) prohibits you from

disposing of this product or its electrical / elec-

tronic accessories as municipal solid waste and

obliges you to make use of the appropriate

waste collection facilities.

The product can be disposed of by returning it

to the distributor when a new product is pur-

chased. The new product must be equivalent

to that being disposed of.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lavorwash STM 160 Kit 2 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info