Bedienungsanleitung Lazada Q189 Wireless Doorbell (Seite 1 von 2) (Englisch)

818443

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Thank you for choosing our doorbell. For better use of this product,

please read operating manual carefully before installation,

and according to the manual for correct installation and use.

1. Non-professionals should not open or maintain it himself to avoid

damaging the sophisticated electronic components.

2. Please try to avoid installation the device under rain, over expose

to sun or close to metal.

3. The actual remote control distance depends on the working

environment as they are affected by interference.

Solving potential problems

Transmitter Structure

Receiver, transmitter, screw, double-sided adhesive sticker,

12V 23A battery

Modern and Stylish design

45 polyphony melodies

4 Volume adjustable (mute included)

Over 150 meters operation range (open air)

Easy to install and use

Learning code function

Low power consumption

Waterproof transmitter (some model)

IP44

Voltage of plug-in receiver AC 85-260V (US,EU,UK,AU)

Selectable ring tone 45melodies

Volume range 0-100dB, 4 level

(Model P,N)

1.Receiver suddenly can’t get signal from transmitter.

Reason 1: Low power battery in transmitter. The less power in trans-

mitter, the shorter range is.

Solution 1:Use a fresh new battery or plug receiver into a nearer outlet.

Page 5

Reason 2: Plug of receiver is loose.

Solution 2:Re-plug your receiver.

Reason 3:Reset the receiver by accident so that transmitter is not paired

with receiver any more.

Solution 3: Re-pair receiver with transmitter as below.

How to re-pair:

1. Press and hold the button for changing volume for 3-4 sec.

2. At the same time bring the transmitter closer to the receiver, and hold

down its button for a 3-4 sec. together.

This way transmitter gets re-pair with receiver.

2. Short operating range

Reason: There are too many obstacles like walls, metal doors between

receiver and transmitter

Solution: Test operating range before installation and change location.

Working frequency 433.92MHZ

Model:Q Model:Q

Model:P

Model:188 Model:189

Flash light

Product size

b) Transmitter installation method 2:

Please prepare electric drill, screwdrivers

1. Find the hole on transmitter back cover, use slotted screwdriver

to push into the hole.

2. Make marks of location on wall.

3. Make holes in the wall with electric drill. Then insert back cover

with screws(provided in the package).

4. Finally, put back front case with PCB board.

2. For DC receiver: Plug in batteries, then you can choose whether to

hang it up or just put it on desk.

1. For AC receiver: Just plug receiver into standard outlet in the room,

then it will work. You can choose melody you want.

3. For Transmitter: Please first test if the operating range you choose

is working or not.

a) Transmitter installation method 1:

use double-side adhesive sticker to fix transmitter cover on the wall.

music

choice

volume

control

volume

control

music

choice

open from here

coding button

indicator light

flash light

indicator light

flash light

coding button

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lazada Q189 Wireless Doorbell Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info