EN
THANK YOU
Many thanks for choosing this EUROM party-tent heater: You have made a very good
choice! We hope that you will be completely satisfied with the product.
In order to get the very best from your party-tent heater, we advise you to read these
instructions carefully before using for the first time. Pay particular attention to the safety
warnings. We also recommend you keep this booklet somewhere safe so that you can
consult it in the future.
IMPORTANT!
Your party-tent heater must be installed fully and fulfil all the relevant electricity
regulations, requirements and rules. If you are in any doubt, have the device installed by a
qualified electrician.
This equipment must be connected to a fully functional, undamaged, single-phase, earthed
electrical socket which provides 220-240V/50Hz current. The installation must be equipped
with a 30 mA earth leakage circuit breaker.
The plug must always be accessible when the device is connected to an electricity supply.
Read this instruction leaflet carefully and follow the instructions.
Before connecting the device, always check that:
the voltage to which you wish to connect the device corresponds the voltage indicated
on the specification plate.
the socket and plug correspond to one another.
the socket is earthed.
the device is hanging securely, at the right height and with sufficient free space around
it (see later in the booklet).
the electrical cable is located away from the vicinity of the heater so as to avoid it
getting too hot.