495489
8
Zoom out
Zoom in
Vorherige Seite
1/25
Nächste Seite
8
The side controller of the monitor
OSD Key Pad function List
Key Description
Power Power on/Power off
Source Source selection (toggle)
Menu Right/Volume +
Menu Left/Volume -
Menu Up
Menu Down
Menu/Exit Menu/Exit selection
LED ON:
Power Status Condition
Green Power on
Orange Power off
Power saving mode
Select LED on via menu
(Front LED: On)
Off AC off
Power on
Select LED on via menu
(Front LED: Off)
LED OFF:
The LED turn completely off when in the „off“ mode regardless
of the monitor being on or off.
The Remote Control (RCU) Instructions
Input Interface
No Function Description
1 Turns the monitor on and off
2 INFO Provides source and resolution information
3 VGA Selects the PC RGB source
DVI Selects the PC DVI source (55“)
HDMI 1 Selects the HDMI source 1
4 COMP 1 Selects the Component source
AV 1 (VIDEO 1) Selects the Composite Video source
HDMI 2 Selects the HDMI source 2
5 COMP 2 Not available at this model
AV 2 (VIDEO 2) Not available at this model
6 PIP Turns the PIP feature on and off
S-V Selects the S-Video source
HD-SDI 2 Not available at this model
7 SWAP Swaps the main source & sub source picture
8 P-SOURCE Selects the secondary sub-source
9 MENU Opens the monitor’s on-screen menu system.
When the menu system is already open,
pressing this button will select the
previous submenu
, , , Navigates through submenus and settings
10 EXIT Closes the menu system
11 ENTER Selects highlighted menu choices
12 SCALING Toggles between different aspect ratios
(Auto, Native, 4x3, 16x9, 16x10 and Letterbox)
FREEZE Freezes the current source image
MUTE Turns off the sound
BRIGHT Adjusts the brightness
CONTRAST Adjusts the contrast
AUTO Synchronizes the monitor to the source
SOURCE Allows selection
of the different
sources
VOLUME- Decreases the
sound volume
VOLUME+ Increases the
sound volume
HOT KEY:
OSD Menu Lock/Unlock Control
Lock: Press Enter, Enter, Exit,
Exit, Enter and Exit on the
controller by sequence and
OSD will be locked.
Unlock: Press Enter, Enter, Exit,
Exit, Enter and Exit on
the controller by sequence
and OSD will be unlocked.
Input connector
Main Power switch AC in
6 Operating the monitor
Power ON-Stand
by Indicator
Remote Control
Receiver
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Legamaster e-Screen FLEX wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info