532121
54
Zoom out
Zoom in
Vorherige Seite
1/74
Nächste Seite
3D Disto, Software Applications
54
Point projection
Plane Switching
If a point can not be projected on the ceiling, just move the laser beam onto
the floor before pressing the DIST key. Following points will be projected on
the floor from now on. The projection surface can be changed at any time.
6.3.2 Targeting and Layout with RM100 Remote Control
Functionality of the
keys in Projector
application
Step Description
Press to go back to the Aligner tool.
1.
In layout mode, the Toolbar changes and you can start to project the grid.
2.
Use the arrow keys to select a point and press .
You can also select points by tapping on a point on the screen or by using the
remote control.
Porous, structured or rough surfaces cause problems if the laser beam cannot
reflect off the exact position of the layout point.
3.
Laser point flashes if the exact position is found. Point is highlighted in red in
sketch area. The result window displays the distance between point and
reference plane.
4.
To layout further points select another point and press .
5.
Press to save the file.
Press to activate laser and a second time to project or measure a
point within the reference area.
Each arrow key selects the neighbouring point, turns the 3D Disto and
starts the iterative measurement. Press once to activate the remote
control and a second time to execute the command.
54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Leica 3D Disto wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Leica 3D Disto

Leica 3D Disto Bedienungsanleitung - Deutsch - 214 seiten

Leica 3D Disto Bedienungsanleitung - Holländisch - 220 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info