Bedienungsanleitung Leica DISTO PRO 4a (Seite 53 von 60) (Englisch)

532141

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

DISTO pro

/ pro

a-1.0.0en

English

Your system has to be designed and

operated in such a way, that it is

secured (e.g. terminal safety switch)

against damage due to error in

measurements, defects on the

instrument or power interruptions.

CAUTION:

Strong magnetic fields in the

measuring environment can

influence automatic end cover

recognition and lead to errors while

measuring.

Precautions:

When measuring near magnetic

fields (e.g. magnets, transformer

stations,...) DISTO automatic end

cover recognition should be

monitored or switched off.

WARNING:

If the product is used together

with computers which have not been

approved by the manufacturer for

use in the field, there is a danger of

electric shock.

Precautions:

Follow the directions given by the

manufacturer for using computer

equipment in the field with our

systems.

Hazards in Use, contd.

CAUTION:

On sending the instrument, or

on the disposal of batteries that are

not fully discharged, a fire could be

caused by improper treatment.

Precautions:

Remove the batteries from their

compartment before sending the

instrument. Dispose of batteries only

if they are completely discharged

(operate the instrument in tracking

mode, until batteries are completely

discharged).

CAUTION:

If you do not intend using the

instrument for a long time, the

batteries may leak and damage the

equipment!

Precautions:

Remove batteries if you are not

going to use the instrument for an

extended period.

CAUTION:

Safety measures could be

voided, persons hurt if the instrument

is not used as intended e.g. it could

be damaged mechanically (e.g.

being dropped, tossed against other

objects...) or damaged by inproperly

installing add-ons and attachments.

Precautions:

Dispose of the equipment

appropriately in accordance with the

regulations in force in your country.

Always prevent access to the

equipment by unauthorized personnel.

Laser Classification

The DISTO produces a visible laser

beam which emerges from the front

of the instrument.

It is a Class2 laser product in

accordance with:

 IEC60825-1: 1993 "Radiation safety

of laser products"

 EN60825-1: 1994 "Radiation safety

of laser products"

It is a Class II laser product in

accordance with:

 FDA 21CFR Ch.I §1040: 1988 (US

Department of Health and Human

Service, Code of Federal

Regulations)

Precautions:

Make sure accesories (e.g. telescopic

viewfinders, hand loops, shoulder

straps ...) are properly attached and

locked in place. Protect your

instrument from mechanical damage.

CAUTION:

If the equipment is improperly

disposed of, the following can happen:

 If plastic parts are burnt,

poisonous gases are produced

which may impair health.

 If batteries are damaged or

overheated, they can explode and

cause poisoning, burning,

corrosion or environmental

contamination.

 By disposing of the equipment

irresponsibly you may enable

unauthorized persons to use it in

contravention of the regulations,

exposing themselves and third

parties to the risk of severe injury

and contaminating the environment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica DISTO PRO 4a Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica DISTO PRO 4a

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info