Bedienungsanleitung Leica M-E - 240 (Seite 236 von 261) (Deutsch, Englisch)

695954

236

Zoom out

Zoom in

Vorherige Seite

1/261

Nächste Seite

232

Precautions and care instructions

CARE INSTRUCTIONS

As any soiling also represents a growth medium for

microorganisms, you should take care to keep the equipment

clean.

FOR THE CAMERA

• Only clean the camera with a soft, dry cloth. Stubborn dirt

should ﬁrst of all be covered with a well-thinned cleaning agent

and then wiped oﬀ with a dry cloth.

• To remove stains and ﬁngerprints, the camera and lens should

be wiped with a clean lint-free cloth. Tougher dirt in hard to

reach corners of the camera body can be removed with a small

brush. The shutter blades may not be touched when doing this.

• All mechanically operated bearings and sliding surfaces on your

camera are lubricated. Please remember this if you will not be

using the camera for a long period of time. To prevent the

lubrication points becoming gummed up, the camera shutter

should be released a number of times every three months. It is

also recommended that you repeatedly move and use all other

controls. The range and aperture setting dials on the lens should

also be moved periodically.

• Take care not to scratch the sensor for the 6-bit coding in the

bayonet fastening (see p. 147), or to get it dirty. Take care also

that no grains of sand or similar particles enter the fastening,

where they could scratch the bayonet. Only clean this

component when dry and do not exert any pressure on the glass

cover.

FOR LENSES

• Normally, a soft hair brush is suﬃcient to remove dust from the

outer lens elements. However, in case of more stubborn dirt,

they can be carefully cleaned with a very clean, soft cloth that is

completely free of foreign matter, using circular motions from

the inside to the outside. We recommend micro-ﬁber cloths

(available from photographic and optical specialists) that are

stored in a protective container and can be washed at

temperatures of up to 40°C (without fabric softener, never

iron!). Cloths for cleaning glasses, which are impregnated with

chemicals, should not be used as they can damage the lens

glass.

• Take care not to scratch the 6-bit coding (sj) in the bayonet

fastening, or to get it dirty. Take care also that no grains of sand

or similar particles enter the fastening, where they could scratch

the bayonet. Never wet this component when cleaning it!

• For optimum front lens protection in unfavorable photographic

conditions (e.g. sand, salt water spray), use transparent UVa

ﬁlters. However, you should bear in mind that, like all ﬁlters, they

can cause unwanted reﬂections in certain backlight situations

and with high contrasts. The generally recommended lens hood

also protects the lens from unintentional ﬁngerprints and the

rain.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica M-E - 240 Seite 236

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica M-E - 240

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info