Bedienungsanleitung Leica M Monochrom (Seite 129 von 170) (Deutsch, Englisch)

495455

129

Zoom out

Zoom in

Vorherige Seite

1/170

Nächste Seite

127

AUTOMATIC BRACKETING

Many attractive subjects are very rich in contrast, i.e.

they have both very light and very dark areas. The

effect can be quite different, depending on which

sections you base your exposure on. In such cases, the

automatic bracketing function in aperture priority mode

on the Leica M Monochrom enables you to produce

several alternatives with graduated exposure, i.e. using

different shutter speeds. You can then select the most

suitable picture for further use, or use appropriate

software to create a picture with an exceptionally high

contrast range (HDR).

The following are available:

– 4 graduations: 0.5EV, 1EV, 1.5EV and 2EV

– 3 numbers of pictures: 3, 5 or 7

– 2 sequences: correct exposure, overexposure,

underexposure or underexposure, correct exposure,

overexposure.

Notes:

• When using automatic bracketing, all AUTO ISO

settings (see p. 116) are specified:

– The sensitivity automatically determined by the

camera for the first picture is also used for all

other pictures in a series, i.e. this ISO value is not

changed during a series.

– The settings in the

AUTO ISO sub-menus have no

effect, i.e. the camera's full shutter speed range is

available.

• Depending on the initial shutter speed, the working

range for automatic bracketing may be limited.

Examples (always with fixed aperture setting):

– Metered shutter speed

1000

s, series of 5

pictures/2EV: Limited function as the -2EV picture

would require

16000

– Metered shutter speed

125

s, series of 5

pictures/2EV: Unrestricted function as the -2EV

picture is possible at

2000

– Metered shutter speed

1000

s, series of 7

pictures/1EV: Limited function as the -3EV picture

would require

8000

– Metered shutter speed

500

s, series of 7

pictures/1EV: Unrestricted function as the -3EV

picture is possible at

4000

• Regardless of this, the specified number of pictures

are always taken, which may mean that several

pictures in a series have the same exposure.

• Only 0.5EV and 1EV graduations are available for

series of 7 pictures.

• Automatic bracketing is not possible when using

flash. If an attached flash unit is turned on, no picture

is taken.

• The function itself remains active until it is

deactivated in the menu. If it is not deactivated,

another series of pictures is taken each time the

shutter release button is pressed.

Setting the function

1. In the picture parameters menu (see p. 97/110),

select

Bracketing (4.2.4), and

2. set whether you want to turn the function on or off.

3. In the main menu (see p. 97/110), select

Bracketing setup (4.1.9),

4. select

No. of exposures, Sequence, or EV

increments

in the sub-menu, and

5. set the desired values or options in the sub-menus.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica M Monochrom Seite 129

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica M Monochrom

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info