Bedienungsanleitung Leica M7 (Seite 129 von 134) (Deutsch, Englisch)

459704

129

Zoom out

Zoom in

Vorherige Seite

1/134

Nächste Seite

124

Viewfinder

Viewfinder principle Large, bright-line viewfinder with auto-

matic parallax compensation.

Eyepiece Set for –0.5 dptr. Corrective lenses from –3 to +3 dptr.

available

Framing Projection of pairs of bright-line frames: For 28 and

90mm (90mm frame only on LEICA M7 0.85) or for 35 and

135mm (35mm frame only on LEICA M7 0.58) or for 50 and

75mm. Automatic projection with the lens fitted. The desired

frame can be projected using the frame selector.

Parallax compensation Automatic compensation of horizontal

and vertical viewfinder/lens parallax according to the focusing

setting, i.e. the viewfinder bright-line frame aligns automatically

with the subject in the lens.

Correspondence of image in viewfinder and on film The

bright-line frame corresponds to a 23 x 35mm image for each

focal length set to its shortest distance. At infinity, the film

frame, depending on the focal length covers approx. 9% (28mm)

to 20% (135mm) more than shown in the corresponding bright-

line frame.

Magnification (for all lenses) LEICA M7 0.58: 0.58x,

LEICA M7 0.72: 0.72x, LEICA M7 0.85: 0.85x.

Wide-base rangefinder Bright split-image and double-image

rangefinder in center of viewfinder image.

Effective base width LEICA M7 0.58: 40.2mm (mechanical

base width 69.25mm x viewfinder magnification 0.58x),

LEICA M7 0.72: 49.9mm (mechanical base width 69.25mm x

viewfinder magnification 0.72x),

LEICA M7 0.85: 58.9mm (mechanical base width 69.25mm x

viewfinder magnification 0.85x).

Displays

In the viewfinder (lower edge) LED symbol for flash status. Four-

digit, seven segment digital LED display, display brightness

adjusted to outside brightness, with decimal point and raised

dot for giving film speeds, warning for exposure compensations,

automatically calculated shutter speed in aperture priority

mode, indication of the use of metering memory-lock, warning

for working above or below the measuring range in aperture

priority mode and course of shutter speeds slower than 2s.

LED light balance with two triangular and one central circular

LED for manual exposure setting. Triangular LEDs show the re-

quired direction of rotation for both the aperture setting ring and

the shutter speed dial.

On top plate Frame counter.

On rear Dial with DX positions for automatic reading of film

speeds or manual setting of film speed and exposure compen-

sation.

Shutter and release mechanism

Shutter Rubberised-cloth horizontal-run, focal plane shutter;

extremely low-noise operation. Electronically controlled, with 2

mechanically controlled shutter speeds of 1/60s and 1/125s.

Shutter speeds With aperture priority mode ("AUTO"), conti-

nuous from 32s to 1/1000s. With manual setting 4s to

1/1000s in whole steps, "B" for long exposures of any duration,

▵ (1/50s) for flash synchronisation.

Shutter release Three-step: Power – Metering memory-lock

(for aperture priority mode) – Release. Integrated standard

thread for cable release.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica M7 Seite 129

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica M7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info