Bedienungsanleitung Leica M9P (Seite 160 von 184) (Deutsch, Englisch)

495453

160

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

156 / Additional functions

ADDITIONAL FUNCTIONS

FOLDER MANAGEMENT

The picture data on the memory card is saved in fol-

ders, which are created automatically. These folder

names have eight characters – three gures and ve

letters. In the factory default setting, the rst folder

is named “100LEICA”, the second “101LEICA” and so

on. As a result, the camera can create a maximum of

999 folders. This counter can be reset at any time.

In addition, the Leica M9 enables you to create new

folders and determine their names, i.e.

– Reset folder numbers

– Create new folders/name folders yourself

RESETTING FOLDER NUMBERS

Note:

This function requires the use of a memory card that

does not contain empty folders, i.e. new or unused

cards, or previously formatted cards.

1. In the main menu (see p. 102/119), select Folder

managem. (4.1.13), and

2. then select Reset folder no. in the sub-menu.

The camera’s internal folder counter is reset, i.e.

when a new folder is created, it will receive the

lowest number not yet issued.

Note:

This can result in some numbers not being used

in certain cases: When e.g. the camera had last

is sued the number 102, and then a memory card is

inserted containing a highest folder number of 105,

the next number issued for a new folder would be

106.

SELECTING FOLDERS

The review (see p. 113/150) and PTP protocol data

transfer functions (see p. 158) always access the

respectively active folder of the memory card in use.

If you want to view or transfer images in/from other

folders, these must be activated.

1. In the main menu (see p. 102/119), select Folder

managem. (4.1.13), and

2. then Select folder in the sub-menu.

• A list of the existing folders appears in the moni-

tor (1.32). If the card contains large amounts of

data, this may take a short while, and instead

the message

Folders are being read Please wait

temporarily appears.

3. Select the desired folder.

CREATING NEW FOLDERS/

NAMING FOLDERS YOURSELF

The Leica M9 enables you to create new folders on

the card and also to determine their names yourself.

1. In the main menu (see p. 102/119), select Folder

managem. (4.1.13), and then

2. select Create new folder in the sub-menu.

• The folder name appears (always “LEICA” at

rst). The cursor is at the rst of the ve letters

in the existing name and it can be edited.

Note:

Folders are always created with the next available

folder number.

3. Use the up and down direction buttons (1.30) and/

or the central setting dial (1.29) to change the rst

ve characters and the left and right direction but-

tons to move the cursor.

The available characters are upper case letters

from A to Z, lower case letters from a to z and

gures from 0 to 9; they are arranged in a con-

tinuous loop in this order.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica M9P Seite 160

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica M9P

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info