Bedienungsanleitung Leica M9P (Seite 163 von 184) (Deutsch, Englisch)

495453

163

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

Transferring data to a computer / 159

CONNECTING AND TRANSFERRING DATA WITH

MAC

OS X (10.6)

1. Use the USB cable supplied (C) to connect the USB

socket (1.33) on the Leica M9 to a free USB port

on the computer. To do this, rst open the ap

(1.25) over the socket on the camera downwards.

• Once the camera has been successfully connected

to the computer, USB connection appears on the

camera display.

2. Now open the “Finder” on the computer.

3. In the left window, click on “Applications” in the

“Places” category.

4. Now select the “Image Capture” program in the

right window.

• The program opens and the name “M9 Digital

Camera” appears in the program title bar.

5. The pictures can now be saved on the computer

using the “Load” button.

Connecting and transferring data with the camera

as an external drive (Mass storage)

WITH WINDOWS OPERATING SYSTEMS:

If the Leica M9 is connected to the computer using

a USB cable, the operating system detects it as an

external drive and assigns it a drive letter. Use Win-

dows Explorer to transfer the picture data to your

computer and save it.

WITH MAC OPERATING SYSTEMS:

If the Leica M9 is connected to the computer using a

USB cable, the memory card used appears as a storage

medium on the desktop. Use the Finder to transfer the

picture data to your computer and save it.

Important:

• Only use the USB cable (C) supplied.

• While data is being transferred from the Leica M9

to the computer, the connection may not under

any

circumstances be broken by removing the USB

cable,

as otherwise the computer and/or the Leica

M9 may crash, ‘and the memory card may even be

ir reparably damaged.

• The Leica M9 cannot be switched o or automatically

switch itself o due to a lack of battery power while

data is being transferred from the camera to the

computer, as this may cause the computer to

‘crash’. For the same reason the battery must never

be removed from the camera while the connection

is active. If the battery capacity runs short during

data transfer, stop the data transfer, switch o the

Leica M9 (see p. 112) and charge the battery (see

p. 106).

CONNECTING AND TRANSFERRING DATA USING

CARD READERS

The picture files can also be transferred to other

computers using a standard card reader for SD/SDHC

memory cards. Card readers with a USB interface are

available for computers with a USB interface. If your

computer is equipped with a PCMCIA slot (common

on portable models), plug-in cards with a PCMCIA

connection are available as an alternative. These

de vices, and further information about them, is avail-

able from a computer accessory dealer.

Note:

The Leica M9 is tted with an integral sensor which

detects the position of the camera – horizontal or ver-

tical (both directions) – for each picture. This informa-

tion automatically allows the pictures to be displayed

upright when subsequently displayed on a computer

running the appropriate programs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica M9P Seite 163

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica M9P

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info