Bedienungsanleitung Leica M9P (Seite 179 von 184) (Deutsch, Englisch)

495453

179

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

Technical data / 175

Flash exposure control

Flash unit connection Via accessory shoe with

center and control contacts.

Synchronization Optionally triggered at the rst or

second shutter curtain.

Flash sync speed =

180

s; longer shutter speeds

available.

Flash exposure metering (with SCA-3501/3502

a dapter or SCA-3000 standard ash unit, e.g.

Leica SF 24D/Leica SF 58). Control with center-

weighted TTL-pre-ash metering.

Flash measurement cell 2 silicon photo diodes with

collection lens in camera base.

Flash exposure compensation ±3

EV in

EV-

steps adjustable on the SCA-3501/3502 adapter.

On Leica SF 24D, ±3EV in

EV- steps with com-

puter control, or from 0 to –3EV in 1EV steps/on

Leica SF 58 adjustable in all modes ±3EV in

steps.

 Readiness: ash symbol

LED in the viewnder constantly lit; conrmation of

suc cess: By the LED remaining lit or ashing rapidly

for a while after taking the picture; underexposure

display by the LED going out for a while.



 Large, bright-line frame view-

nder with automatic parallax compensation.

Eyepiece Adjusted to -0.5 dptr. Correction lenses

from –3 to +3 dpt. available.

 By activating two bright-line

frames: For 35 and 135mm, or for 28 and 90mm, or

for 50 and 75mm. Automatic activation when lens is

attached. Any pair of bright-line frames can be acti vated

using the image eld selector.

Parallax compensation The horizontal and vertical

dierence between the viewnder and the lens is

automatically compensated according to the relevant

distance setting, i.e. the viewnder bright-line auto-

matically aligns with the subject detail recorded by

the lens.

 The

size of the bright-line frame corresponds exactly to

the sensor size of approx. 23.9 x 35.8mm at a setting

distance of 1 meter. At innity setting, depending

on the focal length, approx. 7.3% (28mm) to 18%

(135mm) more is recorded by the sensor than indi-

cated by the corresponding bright-line frame and

slightly less for shorter distance settings than 1m.

Enlargement (for all lenses) 0.68x.

 Split or superimposed

image range nder shown as a bright eld in the

center of the viewnder image.

 47.1mm (mechanical

measurement basis 69.25mm x viewnder enlargement

0.68x).

Displays

 (lower edge) LED symbol for ash status.

Four-digit seven-segment digital display with dots

a bove and below, display brightness adjusted for

ambient brightness, for: Warning of exposure com-

pensation, display for automatically generated shutter

speeds in aperture priority mode, indication of use

of metering memory lock, warning that the metering

or setting ranges are overshot or undershot using

aperture priority and counting down exposures longer

than 2s.

LED light balance with two triangular and one central

circular LED for manual exposure setting. The triangu-

lar LEDs give the direction of rotation of the aperture

setting ring and shutter speed setting dial to adjust

the exposure. Also for warning of when the metering

range is overshot or undershot.

On rear panel 2,5“ monitor (color TFT LCD) with

230.000 pixels, for displays see p. 98.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica M9P Seite 179

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica M9P

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info