Bedienungsanleitung Leica S 007 (Seite 28 von 72) (Englisch)

594983

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Basic picture settings

ISO sensitivity

The ISO setting on the Leica S allows a manual adjustment of the shutter

speed/aperture values to the needs of the particular situation.

As well as the ﬁxed settings, the Leica S also features the

ISO Auto

func-

tion, in which the camera automatically adjusts the sensitivity to the

ambient brightness. When using the function, however, it is also possible

to specify priorities, for example for compositional reasons. You can both

limit the range of sensitivities used and set the shutter speed below

which the sensitivity is automatically increased.

Notes:

A general rule of thumb is digital photography is that higher sensitivities

result in increased noise. This has to be taken into consideration for the

expectations on the picture quality.

Note with picture series that the frame rates decrease with higher sensi-

tivities.

The function is not available when using ﬂash units.

Setting the function

1. In the menu, under IMAGE, select the item ISO and

2. call up the sub-menu

It consists of the available ISO values and the point

ISO Auto.

If you wish to set the sensitivity manually

3. select the desired value

If the sensitivity setting is to function automatically and without

limitations

4. select ISO Auto.

The automatic setting uses all sensitivities and shutter speeds

between

⁄2 s and

⁄500s

To restrict the automatic setting range

1. In the menu, under SETUP , select the item Auto ISO Setup and

2. select

Auto ISO Photo in the sub-menu

3. Select Maximum Auto ISO and/or Maximum Exposure Time

• When setting Maximum Auto ISO, a list with the available values

appears, when setting

Maximum Exposure Time a further sub-menu

with several alternatives.

4. In the

Maximum AUTO ISO menu list, select the highest sensitivity to

be used, and hence the range within which the automatic setting is

to operate, or in the

Maximum Exposure Time sub-menu set either

one of the three focal length-speciﬁc settings -

1/f, 1/ 2f, 1/4f or the

desired slowest shutter speed. With the

⁄f settings the camera

switches to the higher sensitivity if the shutter speed would drop

below the selected threshold due to a lack of brightness, e.g. with a

70mm lens with shutter speeds lower than

⁄60s (with

⁄f (f=focal

length)), or

⁄125s with

⁄2f, or

⁄250s with

⁄4f *.

Note:

The factory setting of

⁄2f results in the slowest shutter speeds according

to the rule of thumb adapted for this format for blur-free pictures taken

from the hand, e.g.

⁄125s with the Summarit-S 1:2.5/70mm ASPH lens.

The corresponding shutter speeds with

⁄2f and

⁄4f in this example would

⁄60s and

⁄250s.

Inhalt_EN.indd 24 20.08.2015 14:14:43

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica S 007 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica S 007

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info