Bedienungsanleitung Leica S 007 (Seite 40 von 72) (Englisch)

594983

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Recording mode

ADDITIONAL FUNCTIONS

USER / APPLICATION-SPECIFIC PROFILES

On the Leica S, any combination of menu settings can be permanently

stored, e.g. so that they can be retrieved quickly and easily at any time

for recurring situations / subjects. A total of four memory slots are

available for these combinations, as well as a factory default setting that

can be retrieved at any time and cannot be changed. You can change the

names of the saved proﬁles. Proﬁles set on the camera can be trans-

ferred to one of the memory cards, for example for use in other camera

units, while proﬁles stored on a card can be transferred onto the camera.

Saving settings / Creating a proﬁle

1. Set the desired functions in the menu

2. In the menu, under

SETUP , select the item User Profiles and

3. select

Save as User Profile in the sub-menu

• A further sub-menu appears with four lines for the available proﬁle

slots.

4. In this sub-menu, select the desired memory slot

• A corresponding conﬁrmation prompt appears

5. Conﬁrm

Ye s or cancel No your selection there

• The sub-menu from step 4. appears again, and the selected mem-

ory slot is marked as occupied.

Selecting a proﬁle

1. In the menu, under

SETUP , select the item User Profiles and

2. select

Load Profile in the sub-menu

• A further sub-menu appears with ﬁve lines, the ﬁrst for the factory

settings, the others for the four proﬁle slots.

Only the lines with occupied proﬁles can be called up.

3. In this sub-menu, select the desired proﬁle

• The selected proﬁle is marked as

active.

Note:

If you change one of the settings for the proﬁle currently in use ---

appears instead of the name of the proﬁle you were previously using in

the initial menu list.

Renaming proﬁles

1. In the menu, under

SETUP , select the item User Proﬁles, and

2. select

Rename User Profile in the sub-menu

• A further sub-menu appears with four lines for the proﬁle slots.

Only the lines with occupied proﬁles can be called up.

3. Select the desired proﬁle

• A keyboard sub-menu is displayed.

4. First delete the existing designation in the title line there, then select

the desired characters

– Turning the rear thumbwheel or pressing the Joystick to left or

right allows each character to be selected in an endless loop.

– Pressing the Joystick up or down allows you to move between

lines.

– Pressing the rear thumbwheel or the Joystick forward copies the

selected character to the title line.

– Special "buttons":

1 2

– 1 Switch between capital and small letters

–

2 Delete characters

–

3 Switch between letter and number, or punctuation marks and

special characters

–

4 Spacebar

5. Conﬁrm your inputs with the function keys marked

O or OK to the top

right or bottom right of the monitor

• The sub-menu from step 2. appears again, the edited proﬁle has

the new designation.

Saving proﬁles to a card / transferring proﬁles from a card

1. In the menu, under

SETUP , select the item User Profile and

2. select

Import from card or Export to Card in the sub-menu.

• A corresponding conﬁrmation prompt appears

3. Conﬁrm there that you really wish to import or export the proﬁle.

Note:

When exporting, all proﬁle slots are transferred to the card, i.e. including

any empty proﬁles.

As a result, when importing proﬁles any existing proﬁles in the camera

will be overwritten, i.e. deleted.

RESETTING ALL CUSTOM SETTINGS

This function allows you to delete all previous custom settings in the

menu at once, and to reset them to the factory default settings.

Setting the function

1. In the menu, under SETUP , select the item Reset Camera and

2. select

No or Ye s in the sub-menu.

Note:

This reset also applies to the proﬁles that may have been created and

saved with

Save as User Profile (see left column).

Inhalt_EN.indd 36 20.08.2015 14:14:44

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica S 007 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica S 007

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info