Bedienungsanleitung Leica S (Seite 36 von 78) (Englisch)

585256

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

White balance

- Auto – For automatic control, which provides neutral results in most

situations,

- Eight ﬁxed presets for the most frequent light sources,

- e.g. for outdoor pictures in sunshine,

- e.g. for outdoor pictures in overcast conditions,

- e.g. for outdoor pictures with the main subject in shadow,

- e.g. for indoor pictures with (prevailing) incandescent lamp light

- e.g. for indoor pictures with (prevailing) light from

halogen metal vapor lamps (HMI)

- e.g. for indoor pictures with (prevailing) light from

ﬂuorescent tubes with warm light color

- e.g. for indoor pictures with (prevailing) light from

ﬂuorescent tubes with cool light color

- e.g. for pictures with (prevailing) electronic ﬂash,

- Greycard – for manual setting by measurement, and

Color temperature 1 – for a directly adjustable color temperature

value.

Note:

When using the Leica SF 58 or electronic ﬂash units that meet the tech-

nical requirements of System Camera Adaption (SCA) for the System

3002 and with an SCA-3502 adapter (version 5 onwards), the white bal-

ance can be set to Auto to achieve correct color reproduction.

However, if other ﬂash units that are not specially designed for the Leica S

are used, the setting should be used.

1 All color temperatures are speciﬁed in Kelvin.

Setting the function

Automatic and ﬁxed settings

1. In the IMAGE menu (see p. 16/26), select White Balance (5.13), and

2. then the desired function in the submenu.

Direct color temperature setting

You can directly set values between 2000 and 13100 (K1) (from 2000 to

5000K in increments of 100, from 5000 to 8000K in increments of 200

and from 8000 to 13 100K in increments of 300). This provides you with

a broad scope, covering most of the color temperatures that can occur in

practice and within which you can adapt the color reproduction very sen-

sitively to the existing light color and/or your personal preferences.

1. In the IMAGE menu (see p. 16/26), select White Balance (5.13),

2. the Color temperature option in the submenu, and

• A further submenu appears - White Balance Kelvin-Setting showing

the value to be set, which is indicated by a red outline.

3. then the desired value.

Manual setting by metering

1. In the IMAGE menu (see p. 16/26), select White Balance (5.13), and

2. then the Greycard option in the submenu.

3. Press the click wheel (1.18) or the joystick (1.17) inwards or to the

right

• The message Attention Please take a picture for setting the white

balance appears in the monitor.

4. Take the picture, making sure that the image ﬁeld contains a white or

neutral gray (reference) surface.

• The monitor shows

- the image based on the automatic white balance setting

- cross hairs in the center of the image

- the button functions valid in this situation - PREVIEW (4.1.11) and

BACK (4.1.12)

5. Press the joystick (1.17) in the desired direction to move the cross

hairs to the subject detail you want to use as the basis for the new

white balance setting (e.g. the reference surface mentioned above).

6. Press the PREVIEW button or press the joystick inwards.

• The color reproduction of the picture is adjusted accordingly and the

button function valid in this situation - SAVE (4.1.13) - also appears.

7. You can now either

- apply this new white balance setting - by pressing the SAVE button,

• The monitor shows the message Whitebalance is set

- or make any number of further settings, as described under 3. - 6.

• In each case, the message described under 3. appears in the moni-

tor.

Note:

In parallel to a saved white balance setting, the corresponding picture is

also always saved, i.e. in addition to the unchanged original picture.

A value set in this way remains saved for and will be used for all pictures

until it is superseded by a new metered value or you use one of the other

white balance settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica S Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info