Bedienungsanleitung Leica S (Seite 39 von 78) (Englisch)

585256

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

RECORDING MODE

SHUTTER RELEASE BUTTON

The Leica S has a three-stage shutter release button (1.1):

1. Brieﬂy tapping it activates the distance and exposure metering sys-

tems, as well as the displays in the viewﬁnder and on the top panel.

Holding the shutter release button at this pressure point keeps the

metering systems and displays active.

When the shutter release button is released, the metering systems and

displays remain active for around 12s.

Notes:

• If review mode was previously set (see p. 56), tapping the shutter

release button switches the camera back to recording mode, and if it

was previously in standby mode (see p. 30), it is reactivated, i.e. meter-

ing systems and displays are turned on.

• The shutter release button is locked

- if the internal buffer memory is temporarily full, e.g. after a series of

pictures (also applies if no memory card is inserted), or

- if the memory card(s) inserted is/are full.

2. Pressing the shutter release button to the pressure point and holding it

in this position stores the metered exposure value for spot and center-

weighted metering in , and modes (see p. 44/45). When using

autofocus in AFs - Sharpness priority - mode (see p. 37) the focus set-

ting is saved at the same time. Letting go of the shutter release button

enables new measurements to be carried out.

Note:

You can also use the menu to set the joystick (1.17) to store the metered

exposure value and/or the automatic focus setting (see p. 39).

3. Pressing further releases the shutter or starts any preselected self

timer delay time (see p. 46).

Series exposures

You can not only use the Leica S to take single pictures but also to pro-

duce a series of pictures.

Setting and using the function

1. In the CAMERA menu (see p. 10/26), select Drive Mode (5.1), and

2. then Continuous in the submenu.

3. The subsequent function is then determined by how you operate the

shutter release button:

- A series of pictures is taken for as long as you hold the shutter release

button all the way down (and the capacity of the buffer memory or the

memory card(s) is sufﬁcient).

- If you press the shutter release button brieﬂy, the camera continues to

take single pictures.

Notes:

• The camera's buffer memory only allows a limited number of pictures to

be taken in a series (see p. 73). When you press the shutter release but-

ton to the pressure point or during a series of pictures, the display in the

viewﬁnder (2.10a) indicates how many (more) pictures are possible in a

series.

• Regardless of how many pictures have been taken in a series, both

review modes (see p. 56) initially show the last picture in the series or

the last picture in the series saved on the currently active card (see p.

60), if not all of the pictures in the series have been transferred from the

internal buffer memory to the relevant card yet.

Details of how to select the other pictures in the series and further

options in the review modes are described in the corresponding sec-

tions starting on p. 56.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica S Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info