Bedienungsanleitung Leica S (Seite 43 von 78) (Englisch)

585256

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

4140

BRACKETING

The following are available:

- 2 numbers of pictures: 3 or 5

- 4 graduations: 0.5EV, 1EV, 2EV and 3EV

Setting the function

1. In the CAMERA menu (see p. 16/26), select Exp. Bracketing (5.5).

• The submenu appears in the monitor, containing the three options

Number of Frames, Aperture Stops and Automatic, with a scale below.

If an exposure compensation is set at the same time, this is indicated

by a corresponding value below the scale.

2. For Number of Frames, turn the click wheel (1.18) or press the joystick

(1.17) to the left or right to select whether you want to take a bracket-

ing exposure series and the number of pictures.

• White triangles appear above the selected graduations on the scale,

shown in red. They indicate the relevant exposure values.

Note:

If an exposure compensation is set at the same time, the zero expo-

sure, i.e. the starting point of the bracketing series, corresponds to the

compensated exposure value in , and exposure modes (see . p.

44/45).

3. Conﬁrm the setting by pressing the click wheel or the joystick inwards,

up or down.

• The setting for Aperture Stops is highlighted as ready for editing.

4. Select the desired graduation by turning the click wheel or pressing

the joystick to the left or right.

• The intervals and triangles displayed change positions according to

the selected graduation.

Note:

• If the bracketing series exceeds the range of ±3EV - due to the combina-

tion of number of pictures and graduation - the scale division changes

from ±3EV to ±6EV. The intervals and triangles displayed adjust accord-

ingly.

• Note that both settings have to be made and conﬁrmed, otherwise the

function will not be active.

5. Conﬁrm the setting by pressing the click wheel or the joystick inwards,

up or down.

• The setting for Automatic is highlighted as ready for editing.

6. Turn the click wheel or press the joystick to the left or right to select

the desired setting, On for an automatic series of exposures after

releasing the shutter once, Off for an individual shutter release for each

picture.

7. Conﬁrm the setting by pressing the click wheel or pressing the joystick

inwards.

• In the initial menu list, a set bracketing series is indicated by XEV /X1.

8. All pictures are produced by pressing the shutter release button once

or several times.

The viewﬁnder shows

• the corresponding warning symbol (2.8)

• the changing displays for shutter speed (2.2) and aperture (2.4)

depending on the graduations

The top panel display shows

• next to the exposure mode + before

the overexposed pictures, 0, before the uncorrected picture,

and - before the underexposed pictures(3.9)

• the display for a bracketing series (3.14b)

The monitor shows (for picture data display, see p. 12)

• the corresponding symbol (4.1.27)

1Example, ﬁrst "X" stands for the graduation, the second for the number of

pictures

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica S Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info