Bedienungsanleitung Leica S (Seite 67 von 78) (Englisch)

585256

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

INSTALLING FIRMWARE UPDATES

Leica is constantly working on developing and optimizing its products. As

digital cameras have many functions that are controlled electronically,

some of these improvements and enhancements to the functions can be

installed on the camera at a later date.

Leica provides ﬁrmware updates at irregular intervals for this purpose.

Information about any resulting changes or additions to the details in

these instructions can be found at: http://www.s.leica-camera.com/

downloads-overview

You can check whether your camera is running the latest ﬁrmware ver-

sion by selecting the Firmware (5.41) option in the menu (see also p. 17

and 26 to 29).

You can easily download new ﬁrmware from our home page and transfer

it to your camera:

1. Format a memory card in your Leica S.

2. Turn off the camera and insert the card into a card reader – either inte-

grated or connected to your computer.

(A reader is required for ﬁrmware updates).

3. Download the ﬁrmware ﬁle from

"https://owners.leica-camera.com/login".

4. Save the ﬁle S-X_xxx.FW at the top level of the card folder structure.

X_xxx stands for the relevant version.

5. Remove the card properly from your card reader, insert the card into

the camera and close the cover. Hold down the joystick inwards for-

wards and turn on the camera with the main switch (1.15).

The update process begins. This may take several minutes.

After a successful update, a corresponding message appears as conﬁr-

mation.

Note:

If the battery does not have sufﬁcient charge, you will see a correspond-

ing warning message.

HDMI SLIDE SHOW

With the Leica S you can view the saved pictures at any size and in excel-

lent quality via an HDMI cable connection using external playback equip-

ment.

Setting the function

1. In the SETUP menu (see S. 17/26), select HDMI (5.22),

2. Resolutuion in the submenu, and

3. then the required format or the automatic setting.

Note:

For optimum playback quality, 1080p should be selected.

4. Select Slideshow in the ﬁrst submenu.

5. Select Select Images in the next submenu.

• The image ﬁeld shows

- the button functions valid in this situation - BACK, – OK , Discard ALL

and All/Single, Select ALL for the button functions valid in this situation

Select? in the center and - Single /ALL for the activated functions, and

- if applicable the symbol (4.6.7) for a picture already selected.

To select only one picture

6. Press the OK button.

• The symbol (4.6.7) appears in the monitor.

To select all pictures

6. Use button (1.25) to select whether you want to delete only the picture

shown or all pictures.

• The relevant displays change: Between All and Single next to the but-

ton and vice versa in the center.

7. Conﬁrm with the OK button.

• The LED (1.21) ﬂashes during the processing time, and the symbol

(4.6.7) then appears in the monitor.

Note:

The BACK button takes you back to step 4.

To undo a selection

6. Press the OK button.

• The displays (4.6.5) and (4.6.3) change

7. The subsequent procedure is exactly the same as that described

above for selecting pictures.

• The symbol (4.6.7) disappears for the relevant pictures.

8. Select Duration in the ﬁrst submenu, and

9. select the required time or Manual if you want to change pictures your-

self.

10. Finally, select Start Show in the ﬁrst submenu to start the slide show.

• Field (4.6.3) shows END, ﬁeld (4.6.2) BACK, ﬁeld (4.6.4) OK, and there

is a message indicating that the slide show is running.

11. Other pictures can be selected either

- using the BACK- and OK buttons, or

- using the click wheel (1.18) in exactly the same way as for viewing

on the monitor.

Note:

Even if the pictures are set to change automatically after a speciﬁed time,

you can call up the previous/next picture manually at any time.

12. The slide show can be stopped at any time by pressing the END but-

ton.

Notes:

• If the Auto Power Off function is activated (see p. 30), a slide show in

progress is stopped after the set time.

• During a slide show, you can take a new picture at any time by fully

pressing the shutter release button to the 3rd pressure point (see p. 36).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Leica S Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Leica S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info